Search:

I think that model is an Oi control so 3201.2 should work for you. What program number are you trying to load? It may be that the program you are trying to load is protected…which will give you the...

So how many of Sinha’s posts have you guys actually read before you decided to pass judgment and jump on the bashing wagon?

I have NEVER seen him pass on an opportunity to post help to other...

It should not be asking you for a password. IIRC this happened to someone else that I was helping and they had to do the procedure a few times before it would take and not ask for a password.
...

It has been awhile but according to my old notes you need to do the following for the SUM CHECK error.

1. Press F1(SEQUENCE) ->Press F2(DATASET) -> Press F4(TABLE) -> You will see “Constance Byte...

1 option besides fixing the actual problem or trying to find a specific parameter to say adjust the spindle speed from what is commanded is to call a macro program via S() command and change the...

Jersey,
The easiest way is as sld4121 has already stated. If you have macro programming on the control you can use a variable at the end of the program to count these parts. All you would have to...

Ok Ford……I will make the attempt at taking the higher road on this one and apologize now as it appears that I must have ruffled your feathers in some other post some time back or said something you...

Ford,
I did read ALL of it before I posted. I just did not read it word for word. This is not the only forum that most of us are in. Reading every post every word across many threads that you are...

As already stated above don't be shy about contacting the MTB or the Probe manufacturer for macros. Most are more then willing to help you get what you need. A lot of these programs are canned and...

Sorry for jumping in guys as I skimmed thru most of the code in the posts.

Jake are you saying that you are running a program thru the entire night, every night in a dwell mode?? Or I should say...

It may help if you tell us the exact model Fanuc control that you are using this on along with the G-code system you are using (A,B, or C). I typically like to set my max spindle speed before...

Bill,
What control? What does the machine do when trying to load the ladder?

Stevo

Do you have a manual that specifies what M82 is used for?

Stevo

That is odd. It could be possible that it is an option that is not active but I could not find anything in the list to confirm that. The manual also does not reference that it is an option but that...

Other then what Bill has stated the only issue that I have had is if we set our feed on one of our 15series at 1 IPM it has issues but this is a very slow feedrate which is not near 400rpm no matter...

Sorry I could not be of more help. I just know the Fanuc bits for this. I am sure someone will have what you need.

Stevo

Wiley1,
I posted the same response over in the machinetoolhelp forum and will post it here as well incase others find it useful.

Is it safe to ass u me that you are "CNC Steve" over in the other...

What was the solution?? It may help others that reference this thread.

Stevo

Hey Phil,
I posted this over in the machinetoolhelp forum for a different user name of "cncguy" but considering it is the exact same question I am going to post it here as well incase it helps...

Keep us posted. I am curious to see what comes of this.

Stevo

Jolulank,
Don't dismiss the suggestion by duivenhok until you try it. Some time back we were having issues on a Mori with a 6t control that we converted a program from another Mori with a Yasnak...

Nope. This series has to be written down. They do not punch out via RS232.

I have attached a blank PMC data form that I like to use to make sure that I have gathered all the correct data and it...

x2

That's not a blow at Smid's book I am just stating that Sinha's book explains it much better for newcomers to macros.

Stevo

I would talk to the people that supplied you the rebuilt motor first. Also it could be some settings in the parameters that need adjustment to the new motor. This is not my area of expertise but...

Yes. Same parameter, same bit 1401.1

Stevo

We need more information. Is this happening when trying to move the machine? Is it when you try to reference the machine.

This typically means that there is a problem with the cable or...

As Ford stated for #3 yes the 16i, 18i and 31i have this function along with pretty much any Fanuc that I have used.

In all 3 controls 16i, 18i, and 31i it is set by parameter 1401.1 (LPR). Which...

wmpy,
Check your PM box.

Stevo

Did you add the right ) parenthesis to the end of the comment in line N0130 as Ford had stated?

Also if you are going to change the P to an O you need to remove the N0102 in the line. It should...

Interesting!! I have seen it the exact opposite but this is typically when it was a typo of a zero instead of an O. I never had any reason to “not” have a program number at the top as keystone is...