Thank you! I implemented the "ask" function into my mpost and it works great - BUT... it appears the information entered needs to be numeric. Is there a way to allow letters and symbols?
Type: Posts; User: ad64075
Thank you! I implemented the "ask" function into my mpost and it works great - BUT... it appears the information entered needs to be numeric. Is there a way to allow letters and symbols?
lol Velocity 4
Thank you, Billetgrip. I like your suggestion about using the Additional User Information and I may try to implement that. I'm not sure where my MPOST manual is - if I ever have one anymore. But I...
Anyone ever experimented with prompting for inputs while posting a program?
For example, O<Program#> will prompt the user to enter in a program number. We all know that. I'd like to include...
I need to find someone within the US who has a Kia Center V25P with a Fanuc Oi-MA control that would be willing to share their parameters. Our machine got wiped out, and my contacts at Hyundai-Wia...
I may have confused the masses slightly... I stated the program example created a 1" diameter... It actually creates a 1.25" diameter. Anyhow...
.
G1G98Z.01F10. ...
I've done this many times. You NEED to use polar interpolation. If you try to generate an arc using G2/G3 in normal contouring mode, you will get an elliptical shape because the machine it seeing...
Does anyone have any experience with the Planet CNC MK2 control? What, if any, issues have you faced? How was the software? Any input is greatly appreciated!
I'm imagining a build where I need up to 4 stepper motors for linear control, up to 4 relays for AC motor control, and 4+ relays to control miscellaneous functions (i.e. air solenoids), and I want to...
A couple things:
-What kind of tool/nose radius are you using?
-Are you applying any comp (G142,G143) prior to N11?
-If yes, have you verified comp direction and tool tip position?
-Have you made...
Press the REWIND softkey
This gentleman says it all. Without this software, your canned cycles are not capable of moving on multiple axes, as indicated by your drawing. You'll need to either purchase the upgrade, or...
What control?
What issues are you having, if I may ask?
Can you use the card slot?
You may want to consider each compressor's CFM rating. This will be most important for your project. Most compressors are rated CFM @ 90 psi, and I would guess the two you are looking at are around...
Having used many of their products previously, I presented Shop Floor Automations with the question, "Can I use my Android device, access the company's network via Wi-Fi, and transfer programs in my...
OK, I just looked and you CAN get indexable tooling to fit your application from ThinBit. See here:
GROOVE 'N TURN® Insertable Parting Tools | THINBIT® Kaiser Tool Company
We have a few OD groove/part tools from Manchester that have minimal corner radii and capable of around 5/8 doc. They offer several different insert widths and are FAIRLY stable, all things...
exactly.
The features will be listed in your parameters pages, including all of the available options for the machine. If there is a "1" next to the description, it is enabled. If there is a "0" next to the...
We just bought an Okuma Genos L400 a few weeks ago. The machine was in stock at Okuma's port in Georgia and was setting on our shop floor a week after we ordered it. Could have been faster, but we...
Too bad they did not design these to use miniature extra-light timing belts, eh??
Ahhhh please excuse my mistake. Without re-inventing the proverbial wheel, may I suggest you will get greater service life from a molded, glass-filled polymer than any machined plastic, especially...
From someone who has beefed up their own r/c tranny to someone who wants to, I found the best was is to start with purchased components and modify them to suit your demands. I'm suggesting this to...
I'm not sure for that area. If you call/email Sam Caudill @ Hyundai Kia, he can tell you who your local parts distributor is. Kia only sells thru distribution.
[email protected]
Where in the US?
Haas barfeeders do interface well with their own machines, however, they also use the hardware of the machine itself. Meaning a Haas barfeeder relys on the machine not only to tell it what to do,...
We may have some extras. What size "stick" tooling and what size bore for the ID tooling? Does your stick tooling use wedges or two bolts to secure the tool to the turret?
We are a stable company and a premier supplier to a number of businesses across varied industries. We do work for the best and produce the best parts, which requires us to hire the best people. We...