Search:

have you tried a new cable to the kdm20. i had button issues & it was the cable. just an idea to try .

thanks but i am needing the face replaced . the y-axis is hanging on it & it just keeps going . they are not able to do face transplants at this time. thx mike

looking for a multicam kdm20-G hand pendant
anyone know where you can purchase or
have built back to factory specs?
or know who makes them so i can
send to them to have rebuilt

thx
mike

did anyone ever figure out a newer upgrade for the atc stepper drive card 6410-001-n-n-n ?

I am still having the same issue. does anyone know of any freelance support people that could help me solve this ?

thx mike

i am still having this issue. is anyone willing to log on to try & show me how to correct this issue? thx mike

thank you routerfiend

ok thanks for looking frank. must be something else in my settings. i can cancel workplanes & it still won't rotate. thx mike

when i do as you said it still only flipped part not rotate part.
i think i have hidden layers of text also causing this issue. look at your pic you made & you can
see the text only shows up when...

2019 R1

thx mike

ok thanks for the offer to take a look.

1 thing that will tell you it is going bad is when you open the job it opens in 3-d window. & it doesn't function correctly as in rotations.

a part like...

thanks Frank

i canceled all the work planes but still cannot rotate parts at all inside the nested sheets. did i miss something ? thanks for your help mike

can someone explain this a little better? driving me nutz on a nested job.

go & check ur alphacam multidrill selection to make sure it matches what is on ur post & ur machine. ive had the same problem alphacam was telling it to drill for different gangdrill i had selected...

anyone have a alphacam 7.0 disc they could help me out with? the 1 we have is scratched bad & cant be used or retrieved thx mike

i am using alphacam advanced router

the part is 1" thick uhmw
it has a 3" pocket & has a down slope on 1 end
inside the pocket so i have to mill going down the slope


i know how to slope...

try global in the reply above this one. they say they can repair most items for abt half cost of new

https://www.cnczone.com/forums/attachment.php?attachmentid=429940&d=1571962639

[QUOTE=jcocina;2330264]Hi! I am also encountering the same problem with my multicam 3000. Do you have these servo motors?[/QUOTE

try this company
they have quick turnaround times
i am...

do you have 1 for the haas 32-3551j 45a smart amp that you would share?? thx mike

so can anyone tell me how to add the m12 to my post?

- - - Updated - - -

so can anyone tell me how to add the m12 to my post?

i have alphacam 2016r1 when i use face milling my post will not
output an m12 code (which make it run at 10 times the speed
& terrible finish, we tried slowing down manually by editing
in...

i am trying to wrap 2d toolpaths onto a 3d surface & can't seem to make it work
i get to the pick reference point & no matter what i put in it won't wrap
can someone give me help on this?

the...

i am having an issue with tool comp
i am ouputting code with alpha cam
& cabinet vision. i use G41/G42 on tool center.
the tool comp will not work in the - or the + period.
i don't think it is...

i am currently using alphacam for my cnc router
i have just ordered a haas vf-3 ss & want to use
alphacam for it also. does anyone use alphacam
for their haas vf mill? if so , will the same post...

i would like to kow if a touch probe would work on a multicam router with an
m24 board? i cut small plastic parts & use a kurt vise on the end of the table.
so a probe would work much better &...

thx frank
that works great
have u ever used a touch probe on a cnc router or know if that can be done
i do alot of small parts & have to find center , so a probe would speed things up for me
...

SOOOOO WHAT IS THAT CODE U ENTER??

there is no issue with reg. edgefinder
the electronic will be much faster & easier.
i ordered the probe that bob suggested &
will let u know how it works .

thx for all your help guys

mike

i checked they said they didn't have one
any more ideas?

thx
mike

i am looking for an electronic edgefinder that will work any material
i cut wood & plastic
any ideas?
thx
mike