Hi DJ.
I am trying to set the floppy drive in operation but is not working.
I have also installed another floppy drive but results are the same.
I have check the power from power supply and...
Type: Posts; User: NKY003
Hi DJ.
I am trying to set the floppy drive in operation but is not working.
I have also installed another floppy drive but results are the same.
I have check the power from power supply and...
Hi Dean.
I have an Ez trak dx 2 axis. Will your above mentioned software work on my mill as well?
If yes , can you send it to me?
[email protected]
Thank you in advance.
Hi DJ.
one more question.
The specific card has power input 24Volts.
on the card there are led with (-12 volts, +12 volts and 5 Volts) these outputs should be produced from the card? or the...
Good day DJ.
Thanks for the input
Already done without any change.
The problem is that I can not get the 110 V at wires 8 and 9 as per manual.
Input and outputs of the transformers are...
Good day Broken.
the address will be:
Ellis Lampetti Str #28
Mesa Geitonia
P.C. 4007
Limassol
Cyprus.
good day mbservice.
yes i did.
all in order.
any other idea?
BR
Nikos
Dear all, good day.
I have purchased a Bridgeport Interact 1 Mk2 milling machine that was operational before transfer it to Cyprus in a container.
It has a Heidenhain TNC2500 control.
Cyprus...
Good day to all.
I had an Electrician in to check the power supply.
Main power is connected correct.
we have followed the electrical drawing and we are not able to have the 110Volts at wire 8...
Hi DJ.
Are you talking about main power supply?
The first time I have connected the power supply I have done it wrong and the house idolater drop. That time I did not had the manual therefore I...
Hi
Thanks for the manual.
now is up and running.
I had to connect a keyboard in order to restart the machine.
once more Thanks.
last one
As mentioned Monitor is not turning on. Therefore I can not tell if the Control is ok.
Perhaps one of you can tell from the LEDs that are on.
In case if anyone has replaced the...
Good day Sir.
Unfortunately I was not able to find someone to check the monitor if it is ok. Machine was operational before shipping to Cyprus. but most probably got damaged during transportation....
Hi mbservice.
Thank you for willing to support.
Yes confirming I have 3 phase power supply.. I had some LED on when I powered on the machine last time but the monitor was dead. So I have removed...
Good day all.
I have recently purchased a Bridgeport EZ Trak DX Series 1 milling machine with 2 Axis control for my personal use from an Auction in UK and have it delivered to my house in Cyprus.
...
Hi Andrew,
Thanks for the feedback.
I will check what I can find in respect to manuals first then.
VBR
Nikos
Dear all good day.
I have recently purchased a milling machines for my personal use from an Auction in UK and have them delivered to my house in Cyprus. The milling machines have been stored for...