Search:

HI Bill,
Do we get to see any pictures?

HI,
I just bought a Prolight 3000, and have the PCI card for it.
Does anyone have the software for it that I can get a copy?
It would seem cheaper to try this card with a vitual machine...

I have recently finished a cnc router, but am struggling with learning Cambam to produce the code....and need to get this part done.
Can someone quote/produce the router code for me so I can cut...

Go to the junk yard, most vans use it in the sliding door track, right at the bottom support

I am also thinking about a homemade EDM, ...would solder work for an electrode?
I have a brass knob I want to duplicate, and it would make sense to pour solder or lead onto it to copy it.

Personally, for the money you will waste .....go buy a chop saw

try Grizzly Tool, they sell arbors

thanks, I am only cutting wood, I can live with the lost time.

I am using Mach 3, and when coming up out of a pocket with the Z axis, it seems that the next block begins to execute before the z motion is finshed.
Is this an indication of too high of feed rate?....

to clear up the current thing, if you look at the winding spec, and find that coil can take 2.1a and then parallel them, you want the current to go to 4.2, so each coil see 2.1a

Go ahead and raise the current, say 10%, and see if you can detect any temp rise, ...keep raising it until happy, but I would also be looking at your screw and see why it is binding