On the DS30 we had the same issues. The manual says to have the bar feeder 2" from the coolant collector which is wrong. Move it as close to the machine as possible.
There is a special command...
Type: Posts; User: Stickerman
On the DS30 we had the same issues. The manual says to have the bar feeder 2" from the coolant collector which is wrong. Move it as close to the machine as possible.
There is a special command...
Yep, M97 not G97... I said I could screw it up
Yes, the L is how many times it repeats. The N100 could be N1 or N10 or whatever you want it to be. I started to do it with N1, N2, but then saw you had that in your other code and added the zeros....
This is what I do when I have a program that's been written for a single part. Take the main part of each tool operation and put it as a sub. Just be sure to run this in the graphic view and don't...
You could do this...
After the tool change put this.
M97 P100 L24 (Call the sub 24 times)
(put all of your retracting moves here... coolant off or whatever)
M30
Just put in G0 A15. to move it 15 degrees. You could make a subprogram to have it repeat enough times to machine all around the part.
This drive is needed for my 1995 Cincinnati Arrow machining center.
Don't hit the F2 key since it sets the offset to the centerline of the tool pocket to the spindle for setting up drills.
Just take a skim cut of the part and move back out in Z then stop the...
It's been a couple of years ago, but I had a memory error on my CT control. Maintenance Technologies had me download the files to my PC then copy them back onto the control which fixed the error. ...
To unlock the door look at the mechanism that holds the door closed. There will be a plug on top with a slot in it that needs to be unscrewed. There might be a small t-shaped tool tied to the box...
Hit the "e-stop" button to turn the servo off then change the parameter.