Search:

Hi,
im looking for someone who have build a cnc plasma cutter with toslink. I need some info and suggestions of suitable transmiter/receivers.

About this. But as far i get it . The best way will be to use those ground clamps and clamp everything to the metal box and then ground the box with a fat wire :D

I really cannot understand that 360 part, can you send me something visual , thanks :D
The motors are nema 17 with peak 1.7 amps so it will be fine.

The only dual shielded cable with twisted wires that i can find around here is SFTP CAT7 AWG23 - do you think this will work for powering the motors?

Thanks for the tips.
AI, if i want to add capacitors to reduce the noise to each line going to the motors can I connect it to the shield like ground or it will disturb the shielding .

Hi,
Im planning to build a very budget CNC for my plasma cutter , I know i will experience many EMI problems and im trying to make my plan around this issue, but im not sure if i understand it...

Which one will be the correct grounding of the signal cable drain wire
Thanks

Hi, AI
I see you are very knowledgeable about cnc builds and familiar with EMI problem. Im planning to build a very budget CNC for my plasma cutter , I know i will experience many EMI problems and...

Hi, Tommy
Im thinking of building very budget cnc plasma for diy hobby stuff. Very valuable information in your post and as you reposted there is really a confusion about pilot arc etc.
I have a...