My firm manufactures performance doors(acoustic, fire etc.). My programs contain a lot of logic to ensure they are machined correctly(i.e. Hinge machining can be effected by Fire Rating etc.)...
Type: Posts; User: bigz1
My firm manufactures performance doors(acoustic, fire etc.). My programs contain a lot of logic to ensure they are machined correctly(i.e. Hinge machining can be effected by Fire Rating etc.)...
Try making a program called TEST and using the barcode called TEST in post #6. This will insert header information. Parameters on the other hand won't work.
I had the same problem. I could not find a way around it using SCM BCR interface.
My son made me a program that bypasses the interface and emulates human input with AutoIT. It requires 2 scans:-
...
Sorry made a mistake. Find this section of code in NCI file(make a copy of the NCI file first):-
{--- Gestione file di battute --- }
$GEN_UNIFY_REF_BAR_FLAGS
1
$
and insert this below it:-
...
Attached is the documentation for configuring the the Bar Code Reader.
You will have to configure the BCR rules to have a prefix=/ and a suffix=+
TEST bar code attached(use code 128)
...
Hi Stephen.
I will dig something out when am back at work. Panelmac also comes with Xilog. i found the configuration for barcode documentation in Xilog folder.. You will also have to configure...
Thanks for PDF. It looks like the nearest equivalent is 22. I have managed to sort out the Gcode. I am just not certain on the Configuring the machine for an aggregate. Have you setup an aggregate...
Managed to get PGMX loaded via bar code reader. Have to add the following NCI file(located in Xilog Plus-CFG Folder) :-
$GEN_LOAD_BCR_TYPE
CSV
$
Still would like to know if its possible for...
I have managed to get the BCR to work with Panel Mac. But it will only import PGM files. Is their a way to configure it to accept CSV files which will direct the machine to the correct PGMX file and...
Does anyone no how to config an aggregate (see photo). Its to go in a 4th axis Biese 322. The config should be the same for any CNI controlled Biesse.
Not all emulators are the same. I bought 3 from:-
https://embeddedsw.net/EMUFDD_Custom_Installation_Biesse.html
Online support was excellent to install it. The shots here are of one of my...
Trying to reduce human translatio errors by using a barcode scanner on the SCM M100 and Maestro but their is little information on how to do it. Appreciate any help on implementing it as we spend...
I am running a Project 350. I have got a handle on the parametrics see below(this is a simple verticle grooved door):-
:1
G120 K1
M61 K1 D1
M116 K1
#3=110 ( Stile
(DO NOT ALTER VAIABLES BELOW...
I hear your pain. I recently bought a Project 350. Had to teach myself how to conditionally loop by looking through old programs. Manual is useless, and the service center dos not even reply to...
I wish to unload a work piece midway through a program and turn it over to route the other side. I need stop the vacuum and raise stops and panel lifter, then continue the program once reloaded with...
I have a Biesse Rover 321. Convert was not the right word. More rewrite the programs.
I have tried IF and GOTO but the Technos G code editor doesn't seem to like logic arguments. The machine is...
Can anyone please help? We have purchased a used Masterwood project 350 CNC unfortunately it does not have a manual on variables, variable looping and operators/ functions(i.e.. rounding numbers to a...
Sorry to bring back this thread but I am trying find out how to do variable looping and operators/ functions(i.e.. rounding numbers to a whole, square root, sine, cosine etc) on the Masterwood any...
I want to convert some programs from my Biesse to Masterwood.
The G code seems easy to convert but have no documentation with the Masterwoods machine on variables, variable looping and operators/...
Hi Loska
Thanks I fixed the drift with your method. I will have a look at the inverter thanks.
Have you had any luck wih 4th axis?
Happy New Years
Sorry for the late reply hope this helps:-
;
; G - Code configuration file - with Arc Support
;
; History
;
; Who When What
; === ======== ========================================
; TM ...
I found the solution:-
Insert the following line to split
MAX_SEGMENT_LINES = nnnn
Stepover and stepdown where fine. 1.5 million not to bad for an intricate carving 600 x 900mm. Unless you...
Its a finishing path on a very large carving using a small bit /steps.
Is it possible to split the Gcode via the post processor and how do I do it? I am helping someone out who owns Artcam 2015 r2 but is finding some files are too large for his Chinese router when...
I am having a problem calibrating the rotary axis that uses weihong nk105 DSP. I have managed to turn the rotary axis both +- direction. But when I have tried to calibrate by altering the rotary Y...
I am having problems on the Y axis drifting(see attached). Can you show how you cured the problem?
Mine is Weihong NK105G2. I having a problem with the spindle gears. When turning on the spindle...
Thanks for the advice
I wish to improve the lighting on my CNC machine, Would it be possible to connect both thhe fan and a 24v 5m led strip to 24v fan terminal. LED strip is 48W total 2 AMP Max.
Many thanks in advance.
Any Kiwis here able to help me laser cut this Jinty Loco. I intend to motorize it. Would make a great outdoor train for the kids.
Does this count? I drew this one for Optical Power a while ago.