Greetings All!
Been awhile since I last asked for help, so here I am again. :wave:
In our shop, the boss discovered that the guys were removing a part from the 4th Axis and setting it aside and...
Type: Posts; User: Stackmatch
Greetings All!
Been awhile since I last asked for help, so here I am again. :wave:
In our shop, the boss discovered that the guys were removing a part from the 4th Axis and setting it aside and...
Hey Guys. I have a Mazak SLT40 with a T1 and the old Freqrol FR-SX-2-22K drive. I am getting the LED 12 and 13 Inverter IOC problem. I just had this drive into Mitsubishi a few months back. I...
I have about 7 Mazak machines I would like to add the stack lights to my machines. I have various controls, anyone go any ideas on what voltage the machines put out and where I can tie into them, and...
You will have to plug a keyboard into this and reset the BIOS. This involves setting the correct date and time, as well as the startup diskand such. I weouldn't be surprised if your machine has now...
I'd say that by the pictures you posted, it'd appear to me you will have a shorted diode. I can see the board is all charred. Anytime you trigger a breaker or blow a fuse is a sign of a shorted...
See if you can get your hands on the manuals for these machines first off. They are sometimes a little confusing, but once you get a good idea of what parameter does what, you can go in and adjust to...
I can guarantee without a doubt that you will have to reprogram the parameters if you change that battery behind the control door, close to the led number display. Before you replace that one, which...
Hi All,
I have a Mazak VTC-20B machine I'd like to install a 4th axis on. I currently have a SMW System 50 indexer on the machine, however, that setup runs off of a spare M-Code. I'm sure...