Here is a small tribute to the Vectric Team for the excellent work with the new Software :cheers:
The name of the font on the second sign is AlphaFitness, and you can find it here:...
Type: Posts; User: Eclipse
Here is a small tribute to the Vectric Team for the excellent work with the new Software :cheers:
The name of the font on the second sign is AlphaFitness, and you can find it here:...
This is a combination off a Celtic knot from Vector Art, and a picture
I found on the net. (Viking Society)
The picture was traced and cleaned up with Inkscape.
Hei Magnar
I don’t think there is any compatible windows software for the smc800 card.
If you want to use Mach3, the card has to put out step and dir signals.
I have a SMC 1500 with the...
http://www.solectro.se/
I used VCarve Wizard and the clipart is from Vectorart.
http://www.vectorart.com/
http://vectric.com/
A self-portrait
I used a 60 degree V cutter 0.5 mm depth.
The machine has a working area of X525mm Y 425mm Z110mm.
Xylotex 3 axes driver board.
Moons 1.27Nm stepper motors
Acme screws 12x3mm (soon to be upgraded to ball screws 15x10mm.)
CNC4PC Parallel...
Here is a video clip of my first homebuilt router : http://media.putfile.com/CNC-Router
warning ! The file is 15mb
Haavard
This is a picture of my DIY router, most of the parts is
Salvage from the waste container.
Moon 1.27Nm stepper motor
Xylotex 3 axes stepper driver
24v 10A power supply
ACME 12x3 mm lead screw...
I decided to purchase Vcarve, onley after a few days of testing
the trial version.
The program make me look like a professional :cool:
I will test the nc file as soon as i get a 60 deg. V-bit
...
Some cool videos:
This is a pdf. file with the drawing of the connections
between Xylotex and cnc4pc Parallel Port Interface Card.
Included E-stop and home/limit switches.
Haavard
Yes it’s connected to a normal parallel port.
I have only connected one wire to gnd, but you
Can connect all gnd. Wires. (Possibly the best way)
Haavard
The drawing was a little bit wrong!
This is the correct wiring.
Pin24 to ground.
Haavard
Hi!
I have made a cable to connect my Xylotex board to
a Cnc4pc board.
Take a look at the drawing, is this correct?
Pardon my bad English
Haavard
Greetings from Norway!
Almost finished my first router :D
I have posted some pictures on a Norwegian site.
Link : http://forum.modellflynytt.no/viewtopic.php?t=2694
I found this on Ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=4660&item=7507824224&rd=1
Does anyone have any experience with this controller?
Has anyone any experience with CncPlayer
http://www.cncplayer.com/