502,750 active members
5,188 visitors online
Register for free
Login

Search:

Type: Posts; User: imperial90303

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Re: - Shipping Container Machine Shop w/PCNC 1100

    Did you think of how and where to place a remote fire extinguisher ?

    if need you sure do not want to have to run to the back of the container to put it out !

    The 40 foot container I am renting...
  2. Re: Milling PCBs with free software... What's out at the moment?

    can you change a Jpeg into a G-code file ?

    I know you would have to put a cutting depth in too .....
  3. Re: Newbie - Want to Make Custom Metal Stamps

    since you have some from the Hong Kong company can you look how they were made ?

    can you see machine marks like it was done in a milling machine ?
  4. Re: Newbie - Want to Make Custom Metal Stamps

    Hi

    I will be going to a trade show next week and I think there is one company that makes metal stamps , I will ask them ,

    I wonder if they use Wire EDM ? if they used a CNC then the cutters...
  5. Re: Newbie - Want to Make Custom Metal Stamps

    can you tell us who you had good luck with ? what size of stamp , and were they made of steel or brass

    thanks
  6. Re: Input on two bench top injection machine options.

    check out Morgan Press machine , they have been made for decades out here in California and I am sure there are some used ones for sale ,

    If you get this going let me know as I might need some...
  7. Re: - Shipping Container Machine Shop w/PCNC 1100

    "next time" you might want to look for a taller container , probably the same cost.....
    I think there are 8 1/2 and 9 1/2 tall

    plus there are some that are 45 ft long containers too ,

    I wish...
  8. Re: Newbie - Want to Make Custom Metal Stamps

    Hi
    are these going to be used for one job or used for years ?

    I have seen small ones like shown above custom made out of Hong Kong on Ebay and Etsy for pretty cheap ,

    I would think you need to...
  9. Replies
    967
    Views
    399

    Re: DIY- CNC Embroidery Machine

    Hi....

    interesting thread for many years ,

    Has anyone built an embroidery machine to do logos on baseball caps ?
  10. Re: - Shipping Container Machine Shop w/PCNC 1100

    Nice set-up

    if you had to move it quick do you have straps om everything to hold it from shifting ?

    and how loud does it get when the CNC is running ? Just wondering if the steel walls add to...
  11. Replies
    9
    Views
    8

    Re: Phenolic CNC routing

    do you have a good place to buy Phenolic ? sheet

    and are the different grades ?

    Thanks
  12. Re: Arduino shield - which to use - CNC shield or G shield ?

    ISERT zweiphasen schrittmotor 1.8 grad.
    Art.-Nr.3455
    ISERT ELECTRONIC.
    Iw=2.0 A Rw=1.0 Ohm
    WX6 08560
    A2405-9212-A2
    Made in japan.

    They are Nema 23 size , I do not know the weight as they...
  13. Re: Arduino shield - which to use - CNC shield or G shield ?

    Hi , thanks for the info , I guess they are bipolar , they are very well made ,
    I would like to re-use them if they are ok
  14. Re: Arduino shield - which to use - CNC shield or G shield ?

    Hi
    sorry I did not know what info to include

    I have an abandoned old Techno Isel Gantry FB-1 , probably from theearly 1990s , the base is 500x500mm ., great German top quality stuff ,

    THe...
  15. Arduino shield - which to use - CNC shield or G shield ?

    Hi , I am building a USB control box for a Gantry type CNC router with stepper motors.


    I have seen both being used with an Arduino Uno , the GRBL "Gshield" and the more popular "CNC shield".
    ...
  16. Replies
    25
    Views
    8

    Re: work with what you got build

    Looks pretty heavy , are your motors strong enough ?
  17. Replies
    20
    Views
    7

    Re: Aluminium profile CNC 1800x1200

    Amazing machine , I wonder how it worked ?
  18. Poll: Re: CNC 6040 6040Z - China Made CNC Routers

    KHOUJ posted above:
    This CNC routers kick ass on my opinion, were operating these machines almost three years now with no hiccups, runs 40-60W average on the power cords in each unit, the power...
  19. Re: ISEL Gantry XYZ setup - need help identifying wheather servo or stepper

    https://www.cnczone.com/forums/attachment.php?attachmentid=400308&stc=1Does the does the motor on the back of the machine look like this with a 9 pin connector ?
  20. Replies
    967
    Views
    399

    Re: DIY- CNC Embroidery Machine

    is there a way to design a desktop machine using regular sewing machine for the mechanical parts ?

    My friend also has an old 50 year old Singer Embroidery machine that he still uses , but they are...
  21. Re: Wanted: control box for Chinese 3020 3040 type CNC router, new / used . scratched

    I would just like to have something to start with ,

    I know there are much better boxes out there , and i have someone that will help me modify the stock box set-up ,

    But he does not want to...
  22. Wanted: control box for Chinese 3020 3040 type CNC router, new / used . scratched OK

    Hi

    I found one of the cheap chinese CNC routers like are for sale on ebay for $400 or so

    it was at the swap meet and CHEAP

    But I did not get the control box :(

    so does anyone have a...
  23. Re: To bring the dead back to life or not ?

    why would you need to change the stepper motors if they power up ?

    I would love to find something like that cheap around here !
  24. Re: How do you convert STL file from 3D printer to G-code or a CNC desktop mill file

    is blender pretty easy to learn ? are there better youtube videos etc to learn it ?

    is there a plug in to convert an image ?

    and is there another plug in to flip it over ?

    thanks
  25. How do you convert STL file from 3D printer to G-code or a CNC desktop mill file

    Hi

    the idea is to take this keyfob that is an STL file
    Organization for the Advancement of Space Industrialization and Settlement keyfob by garethjpowell - Thingiverse

    and change it to G-code...
Results 1 to 25 of 37
Page 1 of 2 1 2