Very good with gibbs post editing. I purchased a rotary post from him and he has been very helpful!! He also edited my current 3 axis post to my specifications. If you need a post or editing do not...
Type: Posts; User: mikeh78
Very good with gibbs post editing. I purchased a rotary post from him and he has been very helpful!! He also edited my current 3 axis post to my specifications. If you need a post or editing do not...
Looking for a RFQ for these parts.
please quote in qty of 5 & 20.
Email RFQ to: mhesse (at) meltel (dot) net.
USA quotes only!!
Just to update this.
I am getting a cable thet runs from the I/O board that is a 5 pin cable on the I/O board end and a 4 pin square plug that the P cool unit plugs into. also a bracket for the p...
There is a cable that runs out of the p cool unit that is a square 4 pin plug ,do i need another cable? the circuit board is a 5 pin in line connnection marked P35. the cable is marked 200 just like...
the machine has never had pcool. I was wondering if there is a board that goes with this?? I have a service manual and have looked throught it for the last few Hrs and can't find any specifics on the...
would a brand new p cool unit work on an 2002 machine. I could get one for $300 but Im not sure if it would work or if i need any boards inside the control to add this??
Cory
I made this same ring from pit202's design for my minimill and it clears the tool changer nicely. I'm not sure if a VF-1 has a different type tool changer??
PM sent with RFQ
Thanks
Mike
Jerry
that is great advice!!!!!
Good luck to you also, it is bad out there.
I hope we all can get thru it. Every day we lose another shop around here.
If we can weather the storm it will get...
runner4404spd, why the hostility?? we are all trying to make it. It is very frustrating for all of us. If he can do it for $30hr then good for him. He is trying to pay the bills. If you and I can't...
PM-RFQ sent
Mike
What are these made of? Aluminum,Steel???
Thanks
Mike
PM sent with prices
Thanks
Mike
I got the file to open with no problems.
Mike
Your e-mail ink is not valid. Please e-mail me some details like location, and minimum qualifications.
Thanks Mike
[email protected]
This job has been awarded, thank you for the quotes.
Mike
I need 1 of these.
Please quote this in 6061 aluminum.
approximate lead time of 1-2 weeks. after job is awarded
I have a solid model if requested and I am attaching a PDF drawing here.
For model...
pit202
Thanks for the idea. This is a great upgrade. you are one smart guy!!
I didn't want to copy your idea without permission.
Thanks
Mike
Good it's not just me. I looked at all the settings I could find and I couldn't find anything to scale it.
Smurph:
The new features are pretty nice, and I have only had 1 crash so far. and I think...
Is anyone else having trouble with the stock size in the new patch?
I seem to be getting a scaling issue. If I draw a rectangle for stock it creates a block several times the actual size and if it...
Great Idea!!!
Pit is this something you are marketing to sell? if not would you be willing to share your drawings, and info on your coolant ports? I think quite a few of us would appreciate it....
Don,
I sent you a PM with my e-mail address. I'll take a look at your file if you want. I'll see if it crashes in my system with the new patch.
The new added features are a nice update. If they...
It would be a nice to have a printable tool list of the tools being used for machine set-up
Mike
HMB3000
Why would you use a entry level cad/cam system if you are making parts that are so valuable? Why didn't you go with Mastercam,Gibbscam, Solidcam? I am a machinist just as you are. I bought...
I agree with DonW on this one. We are all finding bugs/limitations etc. But I'm betting you didn't pay $12,000 for this software either. All software has it's bugs, if you are so fed up please send...
Thanks To Orizaba for answering this in the Enhancments post.
Entering 0.000 in the finish tool Diameter took care of this issue.
First off, I'm new to BOBCAD but have been machine for several years, I have a lot of experience in GIBBS-cam, and learning the features of Bobcam in the last few days has been very painfull to do...
In the facing operation the ability to use a face mill tool. Right now as it is there is no Facemill tool and it forces a finish pass!!! I want to use only 1 tool for facing: a 2" face mill to rip...
To be able to choose your overall depth of cut from the cad model. if you have a pocket that is .3105 deep and you don't a have print to work from(which is getting more comman) then you can choose...
Please send to [email protected] and I'll take a look.
Thanks mike