Search:

Mike i know where the problem lies.

If you look in a mirror you too will see the problem, remember this thread...

After trying the CNC2 i decided that it was very poor, use Mach3 now and very happy.

So any problem i would put down to the controller :rolleyes:

Phil

With the parting tool upside down mounted at the rear you do not need to run in reverse.

Phil

Sent from my HTC Desire using Tapatalk

Hi Mike i am over there as well. MYCNCUK

If you have a sketch ready you could do an RFQ at the UK site

Phil

Sadly they do not have the prices,you have to call, but they do not pursue you like another company I could mention.

Phil

Sent from my HTC Desire using Tapatalk

Rik H & Kai are one & the same. I was just trying to attract his attention.

Phil

Sent from my HTC Desire using Tapatalk

You don't know what you are missing. :D

User demo of OneCNC Cad/Cam

Rik asked me to do a demo of OneCNC i have added a couple of 5min videos. I have never used the B Splines function but it is...

Obviously not. :D

Did you checkout the post i put on mycncuk ?

I have never used that function till now "B Splines" it is so easy i can't understand why it is a problem with SW

Phil

Another tip

Click and hold on the forward and back arrows, then lists all the pages you have been to.

Phil

Eureka

A request for a how to on a MANUAL MILL

Kit needed a MOTORIZED Rotary table with a known speed, and a manual mill with an infinitely adjustable precision Z axis feed

Phil

Ed is correct the Z has to move in sync with the rotary table.

The only way to accomplish this is to connect the rotary table via gearing "THE CORRECT GEARING" so as you turn the rotary table the...

I would guess that unless you can produce a SOLID part with Dolphin you cannot use any other program to get that info either

Phil


Sent from my HTC Desire using Tapatalk

It maybe something to do with a change of avatar, but I couldn't tell what it was because I only saw it while I was looking at the site with my phone.

Phil

Sent from my HTC Desire using Tapatalk

Ha ha .001 of a millimeter is

0.0000394" so it won't be good enough.

Phil

Sent from my HTC Desire using Tapatalk

There is an XML file editor on the Mach3 forum that you could have used to undo your damage. :D

But you didn't ask

Phil

Have you heard of the expression If It Ain't Broke Don't Fix It :D

Id take a look in PORTS & PINS and check you have homing enabled on the correct pin.

Phil

Hi Eddie

Glad you are almost there. There is a bug apparently when using Mach3 with PWM it is documented on page 3 of the member doc PWM Spindle Control as i said you must be logged in to view.
...

The problem as I say is the small diameters. A company that makes watch parts would be a good place to start looking for.

You would need a high speed spindle definitely and diamond tools probably....

Hi, I am a toolmaker working in a shed with better than average machines, what I am saying is that I would struggle to make those parts.

Copper is a very difficult material to work with.

So I...

Eddie

Do you actually know what speed its running at.

Mach says 2000 you have S1000 but you need to measure with a tacho to know what it is.

Phil

Sent from my HTC Desire using Tapatalk

How are you doing the programming ?

Phil

Sent from my HTC Desire using Tapatalk

You are gonna struggle to get that copper part made with those diameters.

Curious why you want a london shop, are you after looking while the jobs being run ?

Phil

Sent from my HTC Desire...

Mr Gibbscam Now you say you had some problems with OneCNC and in particular a Siemens post, Spike13 gets his answer from OneCNC which should allay the fears of any potential user but your reply is...

Hello Mr GibbsCam troll

Head on over to the GibbsCam forum there are six people wanting posts on the first page surely they should not sell their crap unless they had working posts "To coin a...

LongRat

Is the motor running any faster than before ? NOT THE SPINDLE

Phil

Sent from my HTC Desire using Tapatalk

Russ

It's perfectly safe to hold a smaller chuck in a larger chuck.

You are only machining wood after all

Holding a chuck with a morse taper is a bad idea unless you are using a drawbar
...

OK I've had a think.

I'm sorry if i offended you, i was of course talking about the person training you, who you described as not being very good.

You are probably right about me not having...

Well actually you are the one starting with the insults against the software.

Please take a look at the picture is that hard to do/figure out ?

How is it done in Gibbscam does it read your mind...

You also posted this

In this thread http://www.cnczone.com/forums/onecnc/123964-new_user_onecnc.html

I don't think it's the software that's crap maybe some of the users, oh and why wasn't that...

Something doesn't quite add up there.

OneCNC is a Solidworks partner so that doesn't seem right

UKChoppers starts a new job at a company they have a Siemens control and are using OneCNC.

But...