I sent you a PM but the admin said you have exceeded your allowable space.
Type: Posts; User: raygun
I sent you a PM but the admin said you have exceeded your allowable space.
Thanks, I have aquired manuals and have since solved the problems.
Yea thanks, I got it figured out. I finally found the right book.
I have a Daewoo promotion ac servo drive on our Puma 240msb. The turret will not index and shows it is at tool 00 when it is actually setting on tool 5. if you push alarm reset or tool index button,...
Only from tool 4 to 5. This is the only program it has been running. The program looks good. you can stop the spindle and do a tool change. Then it may run 1-50 parts before the problem reappears.
the arrow 1000 mill I'm working on has got me baffled. When it goes to change from tool 4 to tool 5 the z axis moves up from the part but not up to tool change position and then sets there with the...
After disassembling the gearbox I found the cam had a broken lobe. Thanks for all the replies. And Mallard I e-mailed you twice. Maybe my mail is going to a junk folder.
I'm working on a Cincinnati lathe and am having trouble with the turret. It is a Duplomatic BSA 200 series 20. it needed clocked in. I got it to zero and I can grab the turret and move it 5 thou in...
I'm working on a Cincinnati lathe and am having trouble with the turret. It is a Duplomatic BSA 200 series 20. it needed clocked in. I got it to zero and I can grab the turret and move it 5 thou in...