1st. I would recommend you join the Edgecam Community forum, as you are much more likely to get a proper response in a very timely fashion.
2nd. This is better handled through what is called a...
Type: Posts; User: Matt Cardente
1st. I would recommend you join the Edgecam Community forum, as you are much more likely to get a proper response in a very timely fashion.
2nd. This is better handled through what is called a...
This is just probing a face in the Z direction to set a Z work offset.
This piece of code will trigger an alarm if something is obstructing the path of the probe during its travels to the probe...
Shags,
Below is an example probing program from an Okuma MB-5000H Horizontal Machining Center. The only thing that really catches my eye with the small bit of code you posted is probing at a feed...
1. Check you output tolerance maybe make sure its set .0001 in all (3) locations (Sequence, Cycle, Preferences)
2. Change how your Profiling cycle handles code out put of corners. Possibly you are...
Hello,
I have a question, I also have an Okuma Machine tool Model supplied by our distributor. It was sent to me in a .Step File format, I opened it into Solidworks (2013) with no problems. Which...
Hello,
I have a question, I also have an Okuma Machine tool Model supplied by our distributor. It was sent to me in a .Step File format, I opened it into Solidworks (2013) with no problems. Which...
Do you already have a 5-axis post processor?
Please explain what are "Labels".
I believe the logic I suggested would would if you use the <c> force output of XYZ on the same line if the control has the ability to move all three axis simultaneously. Since this is a plasma...
Scratch that, to look like this.
[DELETE][BLKNUM] M05
[DELETE][BLKNUM] [RAPIDGCODE][XMOVE][YMOVE][ZMOVE]
[DELETE][BLKNUM] M03
Without spending a ton of time on this, I supposed you could get around it like this.
In Code Wizard,
Under the "General Motion" Code constructor
Change your "Rapid Move" Code Constructor to...
This question is a little vague, but it seems to me in a standard CNC machining environment you would not want this to happen. The rapid traverse code constructor under general motion is usually...