Search:

Hi Mactec54,

I have tried at full rpm as well as from 50% up. I did make some changes to pd145(auto torque compensation) and pd147(motor slip compensation).

With these 2 set to about 75% i can...

Ok so did some more reading I understand what I have to do now I just cannot find where to switch my VFD to sensorless vector mode

I have a hy03d023b looking through the manual this evening

Hi AL,

Not sure i understand your question. I have only played with a few settings in the VFD

would you know what PD it would be?

So I ordered this set-up from Amazon.ca. Came in looked good. Finally over the Christmas break I hooked it up on my CamTech CNC router. I replaced a Freud2000 3.25hp plunge router. Now the test. ...

Hello,

I also own one of these boards in my CNC router. I am in the process of upgrading my spindle from a wood router to a China spindle with VFD. My router is already set up to turn the wood...

I know this is very old but do you have any video of these machines cutting

I was wondering about the stop switch as well

ok trying TOFRAME right now

Hi Guys,

Were using a 5 axis Breton machine with a Siemens control.

I'm trying to pick up a dowel hole on a compound angle face with an Interapid. I know the rotate and tip for the axis to...

That's a nice design. Are you selling the parts yet? Would you share/sell the design for personal use?

Thanks

Kevin

Dave,

That file worked great. The machine is up and running.

Thanks allot

Kevin

Thanks for the info. I did check the system section in control panel and the computer does see the laser when turned on. LPC214x by Phillips that comes up. The problem is that in Newlydraw when...

We have it on an XP Pro box. We did get a driver with it and have installed both pieces of software. Does it matter what order?

Sorry for this question but i cannot find the answer here and i know it is here somewhere.
We have purchased a China Laser machine from ebay canada and cannot get the Newlydraw software to populate...

I wanted to do the calculations but I cannot find the .xls sheet that one of the members posted. I don't want to spend money where I don't need to or buy something that will not work or I cannot...

Thanks for the reply....I was not thinking that a small motor like that would move such a heavy x axis load. The Gecko 540 drive looks really neat and complete. That would make things easier with...

This is my bridge mill design concept.
I already have the base plate which is a welded aluminum structure 28"x67" with a 1" top plate and 1/2" double "x" pattern for support. It has been stress...

This is my bridge mill design concept.
I already have the base plate which is a welded aluminum structure 28"x67" with a 1" top plate and 1/2" double "x" pattern for support. It has been stress...

I was thinking of using 2 nema 34 frame steppers for my x axis. What would be involved in the electronics end? I am ok with the mechanical part. The machine will be a moving gantry style using thk...

After You Have 2 Surfaces There Knit Them Together And Cut With Surface Or Extrude Up To Surface. Make Sure You Pick The Surface Knit Out Of The Tree.

Kl

Hey,

Does anyone have a stick font for SW? We are trying to cut text on the cnc and are having lots of trouble.

Thanks

Kevin