Search:

I has to be there in 100%. Go to Integrator Support Services (use password) and then CNC Config should be under F1 softkey, then B axis.

Hi,
go to service menu. Password is a zip code of Hurco Indianapolis (you can find it on your machine).
Go to CNC Config Parameters, B axis. There is a parameter Calibrating Home Position which is...

It could be normal for this software version. I am not sure... As I remember you do not have to save NC State on software version 2.3X (you can of course). Reboot doesn't clear this data...

I have no experience with this type of CTS system. Here is rotary union and hydraulic cylinder for part tool unclamp.
On the top you can see air pipe for spindle blast ("cleaning") and CTS coolant...

I am not sure this function was implemented in your software - from input screen go to import/export softkey and use Save NC State to file. It saves tools and part setup data. You need to do it only...

Ultinet for Ultimax is a hardware (card) and software. Your security device (dongle connected to parallel port) has to be programmed to unlock this option.
To check activated software options go to:...

You need to have 3COM ethernet card. Not a card built in the CPU board. Ultinet is an option available for 2.XX software...

It is CTS pump. You can remove the cover from the spindle head i check if you have rotary union on the top of the spindle. Coolant pipe should come to this union. When you will strat this system...

Lublicaton should works when servo power is on. Does not matter whether is in manual or auto mode. There are no any lube logs so control does not know that machine had a vacation :). Lube check list:...

Hi, LC controls lube pump. It works only when servo power is on with some time intervals. Pump is supplied by 110ACV, switched by 8CR separate relay trough fuse 1FU or ALR relay on CRP4 board and...

It's not enough information to try help. What is a Ultimax error message? Can you see any alarm code on servo drives? What type of Ultimax is it, servo type...

One more thing. I am not sure if is a Hurco dealer in Russia (should be) but I am sure that Russia is spare part supplied by Hurco Germany. In future you can contact them - [email protected] and...

Hello, it's OK. On these machines Hurco currently use two belts instead of one wide. Wide one is obsolete as spare part. These two are made of different material than wide. Two belts are quieter.

Hi.
I could be not safety range. This is Spindle Nose to Table Minimum Distance and you can't change it. I don't know value for BMC20. For VMXs minimum distance is approximate 150mm.
You have to...

Hi

I think that parameters and MCD files are wrong. Try find Configuration Backup Diskette an use it using Auxiliary -> System COnfiguration -> Restore Confing. Then ReBoot.

Good luck

Bloke, thanks for a lot of very useful information!
I have one question to you:

In case of backlash compensation in leadscrew map should we always compensate only minus direction map?

When...

I think there is a parameter named allowance in the 3d mold block. Use it.

When you use end mill for rough (not ball) then you receive additional allowance with maximum thickness equal radius of...

This is really good price for this machine. Buy it. Winmax is a best control for you. Machines are strong and trouble free.
Remember that if you are going to mill advanced 3d parts hurco's 3d dialog...

Are you sure that your windows firewall is disabled? Check it.

Hi

Check Renishaw probe parameters (by "colour logic").

Try set Enchaced Trigger Filter to 10ms. Sometimes it work with 0 sometimes not.

In WinMax (Ultimax) part probe parameters I set...

Some machines has been produced as ready for winmax. There is USB at the electrical cabinet. I fact it could function only if winmax is installed on the control. Ultimax works under dos.

Could You show us some draw of this part?

Sorry - my mistake. You can switch of axis on CRP2 board. But I am not sure that this test will work. Otherwise DA board makes problem probably.

100% true.
Using CAM for 2D programming on Hurco machines is without sense.
If someone do it - it's mean that he doesn't know MAX dialogue or company organization forces it...

Something has to wrong with DA board.

Make one more test:
On DA board you can switch off one of axis.
Please switch off this channel for X which makes problem.
Then Y should calibrate I think....

Hi.
Please check limit switch. Maybe it is dirty and too close to marker position.

You can exchange X AC2/J1 & Y AC2/J2 cables and see that Y will calibrate or not.
If X will calibrate and Y not...

I know around 15 Hurco machines without ISNC programmed outside. ISNC is a option. Standard is a BNC (Basic). This is simplest NC mode but you can do with it almost everything. Sometimes code has to...

Hi.
Peck depth is available only for Rigid Tap (option).