Hi,
Normally when your Memory is write protected you have a (physical) key to put it ON/OFF.
What happens when you add e.g. 2. or -2. [+INPUT] in Edit or Jog mode to the [ Shift Value ] /...
Type: Posts; User: Heavy_Metal
Hi,
Normally when your Memory is write protected you have a (physical) key to put it ON/OFF.
What happens when you add e.g. 2. or -2. [+INPUT] in Edit or Jog mode to the [ Shift Value ] /...
Hi,
Your G10 L2 P2 is for a mill, not a lathe.
1st. -- I assume your lathe doesn't have the G54 - G59 otherwise you DON'T use G10, and especially NOT in X, only in Z !!!
2nd. -- Do you have the...
Hi,
Probably your first G76 line isn't okay, try;
G76 P020060 Q100 R0.05 or G76 P020060 Q100 R50
G76 X13.454 Z-50. P1227 Q300 F2.
Hi,
Check here for PDF manuals for the Fanuc-0i-TCcontroller.
https://cncmanual.com/fanuc/fanuc-0i-tc-fanuc/
Just visit the Baruffaldi website and scroll down to the bottom: https://www.baruffaldi.it/en/manual/
You can contact them because you need a login for download.
I have a pdf for the newer DB21 -...
Okay, no problem, ..... glad it's working again.
Try to do a tool index and look if the orange LED switches for one side to the other on the hydraulic solenoid (valve) for "lifting/releasing" the turret.
If it works the proximity sensor inside the...
Hi,
What brand turret, it's a Doosan alarm, did it throw a message for 2024.
Probably a proximity sensor.
Do you have the Electric Circuit / Ladder Diagram [Blue] Book, it contains all the...
Okay, it's possible it doesn't work.
I had a double spindle - double turret with Fanuc 18i-TB and the G84 didn't work on the spindle (centre-line), I had to use the G184 with live tooling.
In the...
Few questions, I assume you want to tap on X0. centre line with the main spindle !!!
Did G84 work before, .... can you do it with a live tool (G184) ??
If nothing works you can use a ER collet...
Hi,
I assume you have a YCM, on my MXP-100i it is something like:
Alert >>>> Metric example for rigid tapping with a M10 x 1.5 metric tap !!!!!!
....
G95 ( MM/REV )
M29 S300
G84 Z-20. R3....
Hi,
I assume you have a USB - 9 pin modem cable with the correct 9 pin to 25 pin adapter, there's no USB to 25 pin cable !!
When all hardware and software settings are correct it should work.
Btw....
Hi,
I can make a BIN-file for you with the programs you want to test, main and sub, you can make a simple one just for a few tools.
Your control needs the [ MEM-CARD ] and [ MEMORY-CARD ] soft-keys...
Hi,
Your story is partially correct and so is theirs.
T0101 calls Position 01 ( Geometry ) and Wear Offset 01, let's say you have a 12 station turret with 1 Tool per holder and you want...
Hi,
Probably one of the batteries, you can get a "low battery" alarm but it can also caused by the "hour counter" for those batteries.
On our 0i-MF we have to replace the batteries in the cabinet...
You're welcome.
Regards.
Do you run the edit program-tool straight from the software disk ?
Be sure you run the FANUCPRG.exe file from Harddisk or USB-stick to drag files back to PC.
Put the small software in a folder or...
Hi,
I found something on the Internet for the HAAS auto-door but for now it's OK, I find it way more safe when I can see what I'm doing then hoping all goes well with a closed door.
The Haas is...
Hi,
Yes you can use multiple Offsets on the same toolholder, there are static and live toolholders with 2 or more tools, also for main and sub spindle side.
I use multiple Offsets on the same...
Check the Fanuc Europe channel or search on YouTube for: [ How to expand CNC memory quickly? ], the Program is really cheap.
When your control has the [ MEM-CARD ] and [ MEMORY-CARD ] soft-keys you...
Hi,
When you have all the manuals sometimes there is a printed code of the ATC-macro in one of the books or Electrical/Ladder Diagram book.
Check all of them and maybe you're lucky to find it.
Hi darrellx,
If your Lynx has an Ethernet connector you could use the Fanuc - [ Program Transfer Tool ], it's a very cheap ( around 25 dollar ) software that transfer programs Up and Down to your...
Hi oetkbyentc,
Feed/Rev. or Feed/Min is synchronized with the spindle while tapping, you can check if you want, that's why Feed Hold doesn't work during tapping, only when it's move to an other...
Hi,
I assume you use FANUC because you're in the FANUC forum and you use the Metric system.
Within FANUC you can use G94 (mm/min) and G95 (mm/rev) for tapping, so two examples for a M10 x 1.5 tap:...
There still options to use CF card for large programs by DNC or M198 via CF Card.
There are lots of videos on YouTube that shows you how to do it.
According the Haas manual they use a I - value in the G76 line similar like Fanuc uses a R for tapered thread.
It's a radial (X) value from start diameter to finish diameter (taper), it's no angle...
Hi,
As a European I can give you a Metric example for a Haas ST25Y Next Gen control for a Metric Fine thread M18 x 1.5
It's a M18 x 1.5 mm pitch with the numbers you can find in a thread table or...
As for as I know not on a 18i - series, you will need at least a 0i-D series with A02B-xxxx-R642.
For the Program Transfer Tool, probably it will work with a correct Ethernet connection.
Fanuc Program Transfer Tool - A08B-9510-J515 ( v15.0 ) costs in Europe approx. €20,- / €25,- ( $24,- / $30,- ).
Fanuc Memory Card Program Edit Tool ( v5 ) - Fanuc A08B-9010-J700/ZZ11 costs in...
Hey,
Try one of these sub-programs, be careful ... it's written in Metric !!!!
Rigid Tapping with G94:
%
O1010( TAP - M5 X 0.8 )
G00 G80 G90 X50. Y0. Z50.
G94(MM/MIN)
M29 S1000