Search:

Hi sorry but all my parts are in use, as an aside I installed a T-slot table in the milling attachment. As far as I can recall it is an (Emco Unimat 3 LATHE MILLING TABLE) and it is mounted on 6...

Thanks albyt1, That is exactly what I have done, I now have an MT2 taper socket within the 20mm lathe nose. unfortunatly I don't have any spares for the Boxford. All the best.

Hi This insert was supplied by boxford for their TCL, Duet etc it is the same as DCMT070202 and DCMT110404 but between the two is has the same relative dimensions.

Binraker
Send your e:mail address to [email protected] and I will forward the manuals, I also have a MK1, the manuals include the circuit diagrams. there is a CPU signal on CZ (Step Z) however...

Hi
Log on to the Mach 3 site and you will see more about controlling the Duet by serial
http://www.machsupport.com/forum/index.php

Hi
If you need the manuals I have copies, I am presently converting the Duet to work with Mach3, The usb to serial should work but they can be fussy, V6 has a setting for the COM port and XP uses...

Hi
try cutplot on Ebay they have V cutters etc, all the best.

Hi
Have a look for cutplot on ebay they do just what you need the V shaped cutter allows for very small grooves whilst maintaining rigidity, all the best.

Hi
I need to find a cheap source for carbide inserts in particular 090204 which seems a rare beast, Sumitomo make one but I can't find a supplier I've tried ebay but to no avail.

Hi you can get the software from Boxford in the downloads section unfortunatly it is protected by a key disk system this disk cannot be copied as the Boxford program specifically programes the disk...

Hi
I have a Boxford Duet Mill/Lathe which I run in mill mode but need a more accurate milling holder than the one provided, I have a milling chuck with an MT2 taper but the Duets spindle is bored...

Hi
There is a copy of version 6 on the http://www.boxford.co.uk/boxford/ website I think your key disk should work but its still pretty poor software. I did manage to get Mach 3 running the Duet but...

Hi
The cable on the Duet is a NULL modem cable the motor control is via parallel and boxford won't tell me the serial commands or the baud rate that the Duet uses, I can't think of how much more...

Hi I have just bought one of these and I will be modifying it with new cabling and I think it needs better software, does anyone have circuit diagrams, cabling information, command structure etc also...

Hi I'am thinking of buying a Boxford TCL 125 but want to talk to the boxford with RS232, I'm experienced in electronics and I can program PIC devices, but need to know the connections to the boxford...

Hi
I've just been looking on ebay UK and there is an ORAC CNC lathe item 140010207061 , this has 12 G codes printed on the headstock, I presume they think this is enough for a training model which...

Hi I'am thinking of buying a Boxford TCL 125 but want to talk to the boxford with RS232, I'm experianced in electronics and I can program PIC devices, but need to know the connections to the boxford...