Could someone tell me if these two EPROMs are compatible with each other or do these controllers use two different "types" of EPROMs? We are having intermittent issues with this controller and want...
Type: Posts; User: WoR
Could someone tell me if these two EPROMs are compatible with each other or do these controllers use two different "types" of EPROMs? We are having intermittent issues with this controller and want...
After several years of wanting to do this, i came up with the money to get a very healthy start into it. To save a little money (at the expense of alot more work which is ok) i stuck pretty close to...
So i heard that EMC2 had a new configuration to start with for torch height control and i wanted to use it on my plasma table. I'm not liking mach3 much and i really want to get back to using EMC2...
Did you give up on this project?
After alot of research by me and the actual owner of the machine, we found that you cannot use the original motors, nor fit them with encoders. We had to get different motors with encoders, and of...
I guess i didn't think it would be as easy as just not assigning the Z axis to any pins, thats great if its that easy. It just threw me because at the beginning of the config wizard there is no...
To my disappointment there was no option in the config program for a simple 2 axis machine (besides lathe which is not what i'm running). I have a plasma table i've converted over to cnc, but i was...
thats for posting this, i too am going to try this out once i get everything running good.
i worked out the steps per several times, and even tried mixing things up to get a different number and it still would not work right. Half the time the motor spins the same direction when you try to...
thanks for the response :)
But having the "steps per" set wrong shouldn't make the servo go completely wacko. I've tried so many numbers, and they all have the same result, a servo going wacko.. i...
Before I explain the problem, here is what i'm using.
Leadshine DCS303 DC Servo Drive http://www.leadshine.com/UploadFile/200910162592891415.pdf
Pittman 9234 Brushed...
anyone know anything about these? any info at all could be helpfull so post up! :)
What would be really nice to know is if there is an encoder made for these that "bolts" right on. The motors are...