Search:

Here are all the passwords I've collected over the years for DSP's. Note that sometimes uppercase/lowercase letters matter. Yeah I ran into the same problem with changing it to English. Just remember...

Your problem is the connection. Don't use that terminal block or you'll crack the tube easily if you tighten too much. Also don't solder the connection or you'll crack the tube. In theory most people...

Mine came with this style fan. It's very powerful and very loud. It also draws so much power that it's what melted the e-stop switch on mine, so if you don't plan on rewiring it then you should NOT...

I finished it and I've just been tuning and testing but so far, so good. Be ready for some time and some serious modifications if you end up going down the path I did.

I finally finished my tube protector and I'm currently working on new mirror and lens mounts. Here is a link if you want to print the tube protectors.

Redsail M700 Laser tube extension by...

I'm making progress but my machine has more problems than rinconchuck did but I'm prepared to work with it. The tube that came with the machine was a 55mm tube and had a 65mm mount so I got new 80mm...

For those who have the motor and drag chain in the way like I did. I finished moving mine last night and it wasn't so bad. I was able to turn the drag chain around without removing all the wires and...

Question about your laser power supply. Were you able to fit your new power supply in the same spot or did you relocate it? My new power supply is 12.5" x 6" and it seems like I'm going to have a...

You can get around rewiring it by not plugging in the exhaust fan, air pump, water pump into the plugs on the back of the machine and plug them in separately and power them on and off separate from...

I think the M700 and X700 are mostly the same machine. My cutting area is 700x500 which seems like it's the X700 since it also has the same base as well. It looks like your motor is reversed and...

So here are a few warnings about the redsail 60w x700 machines on eBay right now. I've worked on a lot of laser cutters out there and this one is no different. 1st I'll tell you the good things. The...

I'm about to do the same upgrade but I was curious how you dealt with the Y-Axis motor. From what I've seen an 80w tube would bump into the y-motor. Here is a picture of my 55w (They claim it was a...

So I'm trying to find a provider and recommendations for the right kind of window to replace the one that comes with the cheap Chinese laser cutters like the redsail cutters.

From what I have read...

Here are the facts:

I'm using the XHC MK4 USB controller from Automation Technology
4-Axis Motion Control Card USB2.0 Interface, CNC MACH3 USB Card XHC-MK4 | Automation Technology Inc

I'm...

Does anyone have the installer for ncstudio? His download link doesn't work anymore?

So I'm based in the San Francisco Bay Area and sadly I'm moving and I need to get rid of this machine. If you're interested I'm selling it for $2500 including the plasma cutter and computer. I cant...

Thanks johndjmix. I just sent him an email. Keeping my fingers crossed.

I upgraded my drag chain last night. I might have over done it.*
Before
http://i.imgur.com/cFFP6.jpg
After
http://i.imgur.com/0j6gB.jpg

I'm getting it all dialed in now and I'm starting to think about THC. Pretty much the only thing I've found is the LCTHC from candcnc. I was wondering if anybody is using it or has other suggestions...

It's really simple. You can get the plugin for Mach3 at ArtSoft USA - Plugins

Use the Xbox360 controller one.

Get an Xbox 360 controller for windows. Be sure to get the one that says for...

I got my sheetcam license and I decided to cut the Autodesk Smoke logo on my CNC Plasma cutter tonight. I think this project is coming along just fine. Autodesk Smoke logo cnc cut - YouTube

Success update. IT CUTS!!!*My first successful cut - YouTube

I'm really close to running my first job on the machine. I've been learning sheetcam and its not bad. I've also been trying out DragonCNC as well and it looks interesting and simple. I've been sick...

I haven't done enough with the machine to have an opinion about EMF yet but I would suspect that both machines would suffer from the same effects with the PP50 being less only because of lower power...

So I'm not using anything fancy like THC yet but my everlast power plasma 50 does have a CNC port and I've wired up pin 1+2 to my output #1 on mach3 and it fires just fine. Which means at this point...

So I finished welding up the racks to hold slates for the waterbed and installed a drain. The pan is 3" deep. The rails are 1" sq tube with 1" welding tabs to hold the slates and then the slates are...

I think I'm going to give up on getting a straight torch that will work with my Everlast Power Plasma 50.
I'm going on 3 weeks now and I can't seem to get any complete answers from anyone.
I...

I haven't wired up the CNC port yet but I'm planning on running it for awhile just using the trigger then maybe using candc THC later.

For your cable management its called a drag chain or cable...

4'x4'x3" 18 gauge galvanized water pan made by a local metal shop (Since I don't have a giant bender) $175 and it looks good and ready for me to install slats in.

I used 3M 03614 Scotch Mount tape to mount the gear, no bolts. After I mounted it I put a piece of 1x2 lumber over it and clamped it tight for the night to help it set firmly. Those rails are not...