What size micron filters do you use to filter the fiberglass from the coolant?
Type: Posts; User: Mark18969
What size micron filters do you use to filter the fiberglass from the coolant?
I have (2) Doosan Lynx that the ductwork broke for the sub spindle wiring. I have a 2012 Lynx 220LMSA and a 2014 LSYC. Both the flexible ducts running the wires to the sub spindle are broken. When...
I am looking for a copy of Smart Cam Lathe newer then version 11.5
I have one person in my shop that is familiar with this software and I would rather have him work with what he knows then try to...
I am looking to rebuild the live toolholders for my Mazak. I have done the single end horizontal. The double ended horizontal are another issue. I think the 2 sides are welded together.
Does anyone...
I am looking to purchase 2 2006 mills with Midaco A3016 SD automatic pallet changers on them. I have no use for the pallet changers at this time. I am looking to see if anyone has an interest in...
Thanks again for the feedback. My person working on th machine informed me that he did check the +/-12 vdc, and the plugs are in the right location. They have been tywrapped together for so many...
Thanks for the feedback. I will check the +/-12 volts. The diagrams for this I have are very limited and I am not sure where to check the 12 vlolts. The motherboard had corrosion on it and we had it...
Thanks for the response. I am leaning to a parameter setting but getting no help from Milltronics. I have had a similar problem in a 2 axis machine, motherboard batteries dying, and the axis going...
I have a Milltronics machine with the Centurion 1 control. The batteries dies on the motherboard and we lost all the settings. After replacing the batteries, and reloading all the bios settings, when...
Just got feedback form Goodyear who makes the belt. It seems the instructions for figuring out the belt tension were incorrect for this application.
It needs to be much tighter. Glad we contacted...
I have a Daewoo SMV 4020 That keeps breaking the spindle belt. We purchased this machine in the fall of 2005 new, and have replaced the belt in 8/07 and 12/08. It just broke again. There is only one...
I have Mazaks, Milltronics, Doosan/Daewoo's, Amada's, Miyano's and Kiwa's and yes they all have thier service issues. But in my experiance, Mazak is the worst. But then you know what thay say about...
Oh, this is a Mazak thing, believe me, do you have any Mazaks?
Anyone out there have problems dealing with Mazak on support, technical issues, or given bad advice that causes a bigger problem that you had to start? Or is it just me?
I have an American made SQT200MS with the screw on hydraulic filter. I also have a SQT250 MSY that is a Japan made machine that has no external filter. I know the screw on filter on the 200 is a...
We finally found out why our Fusion controls were locking up. It wasn’t the hard drive or the motherboard the Mazak people wanted to charge a fortune to replace, it was s simple computer setting. My...
I have a Haas 5C Indexer that the motor just burnt up on. Anyone know where I can get one rebuilt? Or best place to purchase a replacement?
I have a Haas Indexer that the motor just burnt up on. Anyone know where I can get one rebuilt? Or best place to purchase a replacement?
Thats why I love Mazak's support people. Are you running a network card in it?
I thought that might be the same problem, so I disconnected the network cable to the card, and it still locks up.
I...
I have not had this problem. But all the programs we have done are on Mazak format, and we cut and paste thru windows.
Has anyone had Mazak replace thier motherboard on thier machine with the fusion control. I have a pair of SQT lathes and was told this was something that was done a few years ago along with replacing...
I have a PC networking card in the board. What that we have both machines networked to out computers and use the cut and paste method coping the program, layout and setup pages from our server to the...
I called the phone number and talked to Derrick. He said they only have itne paramets for machines 2000 and newer.
I need to find someone with a machine like mine.
I have 2 Mazak SQT lathes with live tooling. A few of my live tooling heads need rebuilding. We have done one here, but I would rather find an experianced cost effective place to send them to.
...
I am looking for a set of parameters for a Miyano BNC34 with a 10TE control.
can anyone send me copy, a list or a download file?
We have a lathe that list the parametetrs, and now won`t single...
I thought about the hard drive. But it started on one machine first, then my second Mazak. It seems when one locks up, within an hour or so, the second Mazak will lock up.
I have them hooked...
I have a pair of Mazak lathes with the Fusion Control. I have been using a network card in them and using the cut and past way of uploading and downloading programs from the pc to them.
Due to...
I have an older Miyano BNC34 lathe. It will not single point thread. This had worked in the past. At one time we lost the parameters on the machine and had to reinstall them. I do not know if this...
I have a pair of Mazak lathes with the Fusion control. They are a few years old, and the controls have started locking up during the day. All of a sudden the buttons below the screen stop working,...
The parts in the past the grain was around the tube. Sort of like feeding thru a centerless grinder. The part is getting powder coated. There is a casting being welded to one end. We want the sanding...