Hello Thanks , yes I tried L already,
and before i can send the ladder i need to communicate so i can download it first . and since there's a serial 25pin port installed and named CH1 i suppose...
Type: Posts; User: VPS
Hello Thanks , yes I tried L already,
and before i can send the ladder i need to communicate so i can download it first . and since there's a serial 25pin port installed and named CH1 i suppose...
Hello ,
i have a problem connecting our Amada laser with Fanuc 160i-L controller with our PC.
i try to follow all settings in the manual but i'm still not able to connecting .
i use the...
Hi all ,
i am running into some problems with my Victor V26 II with fanuc 18T controls .
i bought this machine recently and never used a lathe that has a part catcher installed before .
...
Hello,
today i tried get out Quadra Chek 2000 working again after the PCB failed.
the PCB had to be repaired after the backup battery leaked acid on the PCB and damaged it.
now its...
We try to get our turning machine back running with the spindle top card (a20b-1003-0010) power up with alarm 09 on the top card display.
i know this means heat sink overheat, i check fans and...
Hello,
i was wondering what the product code for example of a servo drive meaning,
Like now i try to figure out if i could use one of spare parts i found online :
FANUC A20B-1000-0160...
yeah i going to check that , you never know that the fuses are bad in the main cabinet of power supply, or transfo but i doubt that,
firing board yeah that seems most likely for now, you know...
checked this to in neutral runs very smooth when starting is goes to 160% then at speed falling back to 50% wich is way to much if running free.
also is runs only when i start manual rotation ,...
also checked,
all fans working and ventilation is completly removed and cleaned and now working perfect, also new ventilator on spindle drive
Hello,
i want to ask you guys some advice to help me figure out the problem of my fanuc spindle drive that keeps blowing up the thyristor modules and high load at idle running.
machine :...
hello, i have a machine equiped with a indramat kda
now i have 2 replacements for this but im not sure if they wil fit,
the original drive (for maho cnc milling machine) is:
...
today found out the D01 D02 and D11/D12 are used in CODB binary conversion instruction , now i forced them on like on the sheet but stil no result, tryed to change de SUB65 to SUB66 so its called...
i tryed this and still the same , no output is activated,
also found this in the manual of the victor machine:
https://www.cnczone.com/forums/attachment.php?attachmentid=422212&stc=1
what...
i want to use it for the pulse i send to my 4th axis to turn, then when turned i get feedback from the 4th axis, M23 is a optional M code of victor to a output relay on the relay board of victor.
https://www.cnczone.com/forums/attachment.php?attachmentid=422136&stc=1...
i wired a finish signal already if that's what you mean,
but i keeps giving me fault code, also the relay doesnt go to 1 output, except if i placing the line in beginning of the ladder program
Hello,
i'm having trouble to implement a optional mcode function on our Victor Vcenter 130 equiped with fanuc 21i
the M codes 21-24 are optional and i want to use the M23 for send a output pulse...
now found out that machine can run max 800rpm when its in setup mode?
but i dont find out what causing this setup mode, exept emergency stop circuit of the cabine doors, but the safety circuit...
Hello i'm having trouble again with my maho 1600s ,
this machine has philips 532 controller and indramat drive modules,
when i run the machine in M41 , first gear is selected, it's running up...
the power supply of our maho 1600s switching on and off and i want to find out if its the power suplly itself failing or if it can be and external input that command him to switch on and off and...
hello , i tryed the same to change the language but i'm not able to change parameter 80 from 0 to 1 ? what can be te reason?
Hello,
We try to start up a 2nd hand Maho 1200S we bought and after some small issues we tryed to
move to reference point of the 3 axis. for some reason the Y axis goes to the end completly then...
Hello,
does anyone knows where to find manuals of maho 1600s and maho 1200s ? i tryed to contact DMG for these manuals but i dont get any feedback of them.
also looking for the ral colors of...
hello,
Our Takisawa TS20 lathe machine wont work anymore since yesterday.
it all started yesterday when we started up de machine and try to run it CW or CCW the spindle acts strange and doesnt...