Search:

Yes, is the same machine configuration

I have three, the connecting manual, operator's manual and maintenance manual, but incredibly there is nothing.

I tried with google, some first issues were solved. However, I did not find...

I noticed that it's possible to rotate tool magazine in manual mode (there are 3 proximity sensor mounted on tool magazine ).

I checked the three corresponding signals on the diagnostic screen and...

Hello Kelsang-Lungta,

I attached two pics, control panel and display with user message.

I tried with twenty different tool number, from T1 to T20. Maybe the tools have a different name, but i do not find a tool screen or tool list.

If anyone can apoort a machine parameter to...

It is true and you are right, Kelsang-Lungta.

Hello Guys,

Any suggestion for questions listed above will be highly appreciated.

Thank you.

I will do ASAP.

Do you know how I can see the tools list and names?
Sincerely I apologize to the forum for the time and the space that I take for ask very simple questions

I worked with this code on makino´s machines with fanuc controller without problem.

When the M06 code is executed, an subprogram is call with the following line of code:

%
O9XXX(TOOL CHANGE)...

Hello guys,

Today morning, I turn On the machine and I have the following users message:

2008 magagine counter missing

I tried the previously suggested, I have select the tool number T#...

According to brief talk, the machine was purchased in operation, it was moved to another place, but unfortunately the owner died. His son recently decided try to put the machine again at service.
...

I'm not sure if tool change is typically directly with M06 code in yasnac mx1 controller, Can anyone confirm to us if tool change should be direct with M06 code?

I made sure that "BAT" or "A/B" on the right-low position of CRT screen is not displayed. I don't understand why not appears this alarm.

with regard to manual, I already have it, I have used in...

yes, the X,Y and Z axis are in TC position using the G30 code and Spindle is orientated using M19 Code.

if after that line of code I try run a M06T# the magazine does not move to spindle and a...

"select the tool number before M06", It has been mentioned twice already and it is an important suggestion, today I do not have access to the machine, but tomorrow I will do without setback.

I...

Hello the_gentlegiant

Thank you for your reply.

I have not tried this way TXX M06, maybe because I verified the programs stored in memory and I executed the same codes in the same order M06...

Hello everybody,

I'm trying to start up again with a machining center unused for 5 years or more. The equipment in question is a kuraki machining center, kv-500 model with yasnac mx1 controller.
...