The good news of the day, my problem is solve: Trying to get a smooth finish = (less sanding), in the wizard I was setting the stepover with a two small value .0625.
Change it to .25 and now the...
Type: Posts; User: BOBINETTE
The good news of the day, my problem is solve: Trying to get a smooth finish = (less sanding), in the wizard I was setting the stepover with a two small value .0625.
Change it to .25 and now the...
18036 and have a gearbox with a 10/1 ratio, did you see my last post
Can I delete the code G93 wherever I see it
I found the Code of another post that I made in 2015, load it up on Mach and run perfectly, took about 3 minutes can you check it to seen if you find...
Yes, even if I set to 15 or 1500 it’s always crawling
Does all code run slow now? Or just this one?
I don't know because when I saw it going this slow I stop the process (speed is like comparing a turtle and a rabbit)
My Mach3 version is 3.042-040 and yes I have already run codes correctly with this software.
Thank you
I generated a square Gcode with vcarve, cutting air and the feedrate is ok
Thank you for the prompt reply, it's only slow while processing the G-Codes, jogging is normal . I was reading your comments on another tread that Kernel frequency on the diagnostics page and see if...
Hi, have been using your screen set since2010 and it is working perfectly.
I know that my problem isn’t coming from the screen set, Mach doesn’t recognize the federate that I’m asking, no mather if...
Hi, I don't know if this can be any help, take a look at post #409 to 424
Hi, I got a good look at your design and it appeared that you have about the same mounting for your motors that I have and I'm interested about your Hydraulics cylinders, can you elaborate on the...
Hi to Emery one
I have this sign to carve, can someone give me an hand on this sign, and do you recognize the letters that are use.
Thank you187200
Hi,
From what I can understand about your .75, .375 and the .25 it is the tool you are using, if that is the case, why not use a .5 for the roughing and take the .25 for the finishing tool, it wil...
Hi Gerry
So if I understand this correctly with this motor, there is no chance to override the gearbox max input RPM.
To get the motor to 1200+- RPM there must be a formula to calculate the...
Hi to all of you
I have a stepper motor KL34H280-45-8A 640 oz In. 1.8° /200 Steps Per Rev.
NEMA 34 Framewith, Gecko driver G203V with a 10/1 ratio gearbox that is limited to 4000 RPM at the intake...
V Carve Pro or even better Aspire, not cheap but easy to learn, they have trial that you can download for free
Hi, I know that with some BOB (PMDX 122) you can connect two drives to the same pin this way you don't have to slave a drive to another one and by doing this you can add another drive, the way I'm...
Hi Gerry, I am using your screen set and I would like to know if I can incorporate the looks (Tabs) and functions of your screen set in this pendant ( ShuttleRU ) before I buy it.
Thank you
Hi, don't know much about the the heat resistance or the with formaldehyde of this product, but for the breathabily, the best one that I know about is TRUPAN,
Maybe you can do a search on this one....
Salut Yves
So we have two things in common, we both live in Quebec and I also made my CNC, I’m from Shawinigan.
With Ger21 screen set you won’t regret it, I think for a few bucks more this guy will...
Hi Beluga 282
You can use either the French or English version, using the French version has a downside to it for CNC machining, you will have less resort (HELP). You will have to translate your...
With this new 881 macro I feel a lot safer and it gives me all the time that I need, it’s much better than a delay, getting old and don’t want to rush anything.
I have bought quite a few software...
Ok Iwould like to give the display the message box a try.
Thank you
How about inserting a M6 between the mobile plate and the fix plate
I don't know if this can give you an idea; maybe insert the command in the initial macro to press cycle start after the mobile plate touch and before the rapid move to the fix plate asking for a...
Hi, I am using shuttle pro to run most of the options on my CNC, it would be nice if I could use it, so a dialog box asking me for something like cycle start, I think that would be safer than a...
Initial Auto Zero:
When doing an initial auto zero is it possible to insert a delay or ask for another cycle start between probing the mobile plate and the fixe plate, this would give time to move...
How can I activate the charge pump
Yes it have a charge pump (Watchdog)
Hi,
I have limits switches and an Emergency Stop install, is the EStop relay the same thing that the Emergency Stop that I already have.
Thank you for the reply
Hi to all
I have install a SSR to turn my router on and off, it is working properly when Mach3 is open, my BOB is a PMDX122, so can I ask for more ? Maybe
My problem is when I start up Windows...