Search:

HI, if you are still looking please E-mail me at [email protected].
Thanks,
Saul

From the information I have collected it seems that I do need to replace the PLC program in my machine.

Does anyone have a copy they can send me?

Have left message with EMCO but no returns...

I have now done a memory clean and re-entered the data from paper.

The error 12 is now gone.

One thing that was coming up and still has not gone away is that it complains about a "Key Switch...

I have checked the setting on the machine and the PLC settings seem to match a copy that I have on paper.

The work area battery had been removed not the computer board memory battery.

Still no...

Well the controller power supply was sent out to be repaired and it has returned.

The controller now powers up and gives me an error 12. PP memory not formatted properly.

Looking up the error...

Hi... The company I work for just picked up a 1988 vintage emcoturn 340 with a Siemens controller. I'm now trying to nurse the machine back to working order.

The coolant pump is missing and the...

Hi,

Just toggled SETTING #6219...

Everything ok now..

Thanks,

Saul

Hi,

I am using a Matsuura MC-600V with a MX3 Yasnac controller.

I had a program running when it did a tool change the machine came up with an error and alarm that will not go away.

182: SEQ...