If it is a sevro driven turret it has lost #1 station is this a Daewoo. we have a puma 300 here that has the servo driven turret. they should be some paperwork on how to reset it
Type: Posts; User: BJ100
If it is a sevro driven turret it has lost #1 station is this a Daewoo. we have a puma 300 here that has the servo driven turret. they should be some paperwork on how to reset it
If you are using two stations the first station is OK ,when machine backs up to index to the next tool, it will move into cutting position before it is locked in place,I think I have not seen it.,I...
we are having a strange problem on this machine it has 6T control on it. The problem is sometimes the machine will try to index while the machine is running the parts program, has anybody ever seen...
Found problem oil cooler fan was not working, should be allright now, thanks for the help. BJ100
we have 2 puma 250 one of them are getting very warm around where the turret indexes ,the other one is not hot at all could this be a bearing problem on the shaft that drives the turret,. Both...
machine running fine,was clamp/unclamp prox which was added when the machine was refitted with new control, but was not noted on print,did not know O WELL,Thanks for the help
does not matter,power down machine lossen encoder remove belt change drive belts replace endcorder belt. and your ready to go.
The machine was refitted with the O-T control , the unclamp sol. is powered up . It is not stuck,
Hello, When power is applied,control on turret will unclamp and stay unclamped has anybody had this problem, it s equipped with the prox. sensors Thanks
Hello, We are having a problem with a SDU 600 / IOC Alarm,I have changed the top board and that was not the problem. I have blowed the carbon out of the motor but did not change the brushes yet.Could...
Hello my name Barry I have been in the m/r field for about 35 years,only about 15 dealing with cnc. maybe with can help each orther out and make our lives a little less stressful.