Search:

http://phlatboyz.com/infopage.asp?page=1

Have you tried a different keyboard?

McMaster-Carr

I had a problem gaining steps and it was due to line noise on the parallel line at the breakout board, some filter caps cured the problem.

http://www.cnczone.com/forums/410814-post11.html

"The Z axis motion control mechanism including a 5/8 x 0.200 pitch ballscrew"
I'm not sure , but the word mechanism probably should have been "assembly" to include the rotating nut, belt, pulleys,...

Same as Hoss's, same as mine.
I don't know why you can't see the stepper motor and mount.
http://www.stirlingsteele.com/files/leftviewZaxis.jpg

Maybe you should have bought the kit instead of the plans.

millplans
MINI-MILL CNC CONVERSION KITS - $465.00

Here is a freebe I found back in the 90's suprising it is still available.

DeskNC

TC17 will only convert to curves after you explode the text, it does fine on letters without islands like an "L" or "l" but a "g" or a "p" gets distorted.

Typically any motor that has a 2 prong plug is double insulated, the 690 has a 3 prong plug, I checked it on one of mine and there is continuity between the housing and the shaft. I believe that...

Typically any motor that has a 2 prong plug is double insulated, the 690 has a 3 prong plug, I checked it on one of mine and there is continuity between the housing and the shaft.

Check out cnc4free.org

anything for windows mobile (pocket-pc)

click on the word config next to the xbox controller in the screen shown

Thanks anyway but I seemed to have located the document that I was looking for in this link.
Thanks pminmo for posting this.
http://www.cnczone.com/forums/136231-post10.html

I bought these drives about 4 or 5 years ago and finally decided to put them to work only thing is I seem to have misplaced the documentation for them.
Anybody have the info or know where to find...

http://www.otocoup.com/

Would wheel bearings such as Honda accord front wheel bearings work as lower spindle bearings?

For $36.00 I couldn't do a better job not to mention the time.
might have to make an adapter for the dewalt.
It was made to fit a bosch but I bought a cheap Royobi and it fits with the use of some...

Or, you could buy a grinder skate that is used to make the rails for the mechmate,
Rail Grinding Skate
I purchased one myself and am working on making my own V-rails from 2" x2" x 1/4" hot rolled...

using 2 open ended timing belts fixed to the gantry ends and adjustments will be made there. Same principle as the Paralok fence system that I posted in the other afore mentioned thread.
Your cable...

when you create a new file you have that option.

did you setup artcam to use inch scale?

What is the outside diameter of the router housing, porter cable is 3.5"

Check out Rodm1954's mod. He's from your neck of the woods, well the same big rock anyway.
http://www.cnczone.com/forums/benchtop_machines/29650-x2_column_head_larger_crossslide_table.html#post249849

The Dirt Bag, Inc. Computer Dust Filter Systems

Techno Linear Motion Components - Extrusions, Table Plates & Profiles Linear Rails, Guides, Bearings & Slides; Acme, Ball Screws & Nuts

As I stated in post #11 The idea is derived from Industrial Hobbies which has since removed all pics of the limit switches. the electronics are similar but not the same
the optos are, if I recall...

encoders