I bought this used mill last month and this was my first tapping job. after getting some hole bored instead of thread my son started to find out the reason for this. He found the speed doesnt matches...
Type: Posts; User: Manjeet
I bought this used mill last month and this was my first tapping job. after getting some hole bored instead of thread my son started to find out the reason for this. He found the speed doesnt matches...
Yes I have enabled rigid tapping bit=1
Moreover I am successfully doing rigid taping by half the speed command.
S50 F80 for .8 pitch 5mm tap.
Only thing is spindle is running twice rpm than...
I have haas mill VF3 model 2005. My problem is there is a spindle rpm mismatch with S command given in program. I came to know this while I was getting bored hole in rigid taping. I have checked all...
Hello Switcher,
Are you really making the models or just posting the .dxf files created with wintopo. Beacause any file downloaded cannot go into machining. It has to be done a lot to correct the...
Hi Xerex,
I have been reading this thread. I must thang you for the great job.
If you give me the PCB file of the above breakout board I can get less than 50USD for 10 PCBs
Manjeet:)
Hi all,
I have been reading this topic some time back and now Tehere have been a great developement. Very nice work xerex.. Thanks.
I must mention here that I had developed UHU controller PCB....
Hi Eric, Yes I am still alive. please do check you email inbox for my mail.
Regards..Manjeet.. :wave:
Hi vroemm,
But from where can I download "Layout 24_10_95 English"
Manjeet:)
Hi Max
see the link. http://gsst.wikispaces.com/UHUget
Manjeet:)
Hi Tom
I am sorry for my comments.
Manjeet :cheers:
Hi Robert,
as I already said I had assembled the kit few days agao and tested it with TurboCNC. It works fine. And more I had sent 4 nos. PCBs to Andrew Purseglove in UK, and 5 nos. PCBs to Mr....
and control the current of your welding equipment by turning the knob either way.
OR
Contols the speed of your welding robot.
:cheers: Manjeet
Hi vroemm,
Thanks for the information. Yes this was needed on the http://gsst.wikispaces.com/.
I have tested my UHU controller with TurboCNC. It works fine. at present I tested only one...
Hi All,
I have assembled my frist UHU Servo controller. On the first shot when I connected the motor supply to the controller I was surprised to see the controller working. It was holding the...
Hi Vid,
Why not you try with PCB. and get parts from the shop near you.
Manjeet :)
Hi,
Please note that this not my kit, I had made only PCBs. The parts are collected from the market and thats the kit.
From my previous post you can see the result of my assembled PCB. I will...
Hi All,
I recieved UHU Chips from Mr.Uli few days back. Today I inserted the ships on my assembled PCB. To my surprise the moment I applied power to the board it really apeared in the Terminal...
What had happened to this forum. No posts since last 12 days.
Manjeet :)
Tommy,
The same happened with me few years ago. Note that putting gender ganger changer in between the wrong socket mounted on the PCB does not swap the pins.
Manjeet
Hi Tommy,
you must have used wrong subd9 socket, look at the PCB for the pin 1 marking. just change the socket gender to swap the pins.
Manjeet..... :))
@ Erik
You are absolutely right The PCBs I had made are of Stefan8051 design. If tried and tested PCB layout is available here why should go for the new one.
:) Manjeet
Please note that this is Do It Yourself forum and you are asking for complete tested kit.
If you want readymade tried and tested one why dont you get Gecko it is tried, tested and reliable. and...
Hi Zathras
It can drive a DC motor which runs by applying DC power to its terminals(without any interface in between DC power supply and motor)
Manjeet.. :cheers:
Hi Ejkoeze
I am not here to make profit, this price is only what the items cost me.
I have my own business of manufacturing Special Purpose Machines for Automobile and Printing & Packaging...
3 Nos. PCBs + 3 Set of Parts + shipping = 162 USD Only
3 Nos. PCBs + 3 Set of Parts + shipping 12 USD
Hi All,
Yes thats nice competetion.
Any body ordering a set of three UHU Servo controller that will be of 150 USD + Shipping.
i.e. 3 Nos. PCBs + # Set of Parts + shipping 12 USD.
Note....
Hi All
The complete kit is now available with me.
Kit Price = 60 USD + 7 USD Shipping
Kit includes PCB + All the parts
Kit doesnot includes the pre programmed Controller chip this you...
Hi All,
Finding diodes P6KE15CA is not easy here. can anyone suggest equivalent. I am using BA159 instead of MUR 120. BA159 is easily available.
Manjeet
Hi All,
Here is the assembling details of the UHU servo controller which I downloaded from (http://www.gertronik.de/cncecke/UHU_Aufbau.zip)
with the help of google language tools I have...