Hi
I need to modify parameter 20. but this procedure does not work for me.
-- I convert the value in parameter 30 to hexadecimal
-- in the hexadecimal number I move the two digits as you...
Type: Posts; User: mayelo82
Hi
I need to modify parameter 20. but this procedure does not work for me.
-- I convert the value in parameter 30 to hexadecimal
-- in the hexadecimal number I move the two digits as you...
thanks John for your support
the problem was solved
SODICK AQ353L
failure to start wire is tension but had already resolved
but now it appears this alarm
E00180 shows alarm. Excess discharge time (SH) press ACK
When I turn on the machine is servo drive MSDA013D1A. marks (ERROR 14 Overcurrent)
could this be the cause of the failure of the tension wire
Good day
The procedure was performed for calibration
without wire
VOUT and GND = 60mV
TENSENS and GND = 300mV