Search:

Sorry. I mean: use 4N35 instead

Estlcam recommends 4N32 Optocoupler for on/off signal.
But this type works not with YL620-H !
Use 4N32 instead!

It's only a small detail, but I would still configure it correctly.
I start/stop the VFD via DI1.
However, the "run" LED never lights up.

My parameter adjustments:

P0-02: 1
P0-03: 2
P7-01:...

Set or remove the check mark on "Reverse" / "Rückwärts" for the Y axis.
See attachement.

With version 2.10.1208.601 delivered with the (chinese) machine it works.
The problem is, that the pin 3 is used for Z- and Probe (if the controller JS-3163b is connected via USB).
All newer...

I drew a circuit. Let's see if that works then.
//www91.zippyshare.com/thumb/hOF0NLPL/file.html

Same issue here with JP-3163b.
The 0-10V output pin gives 5.0 to 5.93V.
The inverter have a 10V, 5V and 20mA input.
First I think, the 5V input is PWM. But this not work.
Any ideas?