Get stock one from fusion works if you set the smoothing parameters right
Type: Posts; User: ScorpionTDL
Get stock one from fusion works if you set the smoothing parameters right
You have the line
G43 Z15. H0
In your code.
G43 loads the tool offset out of the tool table.
I assume that your m06 does not write the tool offset to the tool table. Only applies the measured...
Yea you got that correctly.
Don't know if there is a other more easier way. But this has been working fine for more.
I do something similar for monitoring my 4th axis,
you can trigger the estop from the expr.txt
this is what I do for my 4th axis:
#OnInit
state_estop_4th = 0;
#Loop
Nevertheless a better repository for the files and a clearer communication about updates and change logs would be highly appreciated
Firmware is always bundled with the executable. I keep a private repository of old versions on my system. If I need to go back I just copy over the old binaries and let TNG downgrade the firmware. It...
do we have a change log for the current version?
The last entry in ChangeLog.txt is from 2022-12-11
Did you by accident reduced rapid speeds to 0%?
Happened to me a few times and I was wondering why the heck the machine would not move....
Just change the smoothing in the post properties to "G64 with P"
Its set to "G64 with PQ" by default, for whatever reason (most likely because the post is mainly the LinuxCNC post and nobody at...
entering just G55 will simply load the G55 Coordinate System offset -> restoring the XYZ Zero position that you saved to G55 in a previous step.
The offset coordinates themselves get store in the...
What Software Version are you running?
There was an issue last year that stoppt the licensing to work correctly
updating to a current version solves this issue.
Have a look at ...
Can you post your gcode that you used for testing?
This is not a wiring problem. Planetcnc does not change the state of the output that is linked to the spindel when stopping the program with the stop button. As instructed above you can achieve this...
the latest version 2022-12-11 fixed the issue for me
You would not see the backlash in the gui. Only on the machine
what are your steps / mm settings?
Depending on the way you set your 0 position the machine might not be able to reach the position based on your settings. Therefore it goes to the nearest position...
I faced a similar issue on my Lathe when running on Linux. The same profile works fine on Windows. I reverted back to the previous version till this issue is fixed.
When are we going to see this version publicly available on the web page?
Do you have all the icons in the correct path in the default profile directory as well?
because if not it might noch display them due to this. maybe give them just a name and no icon for starters...
If you are using the default Profile the *txt files needs to go into the default profile
<YourPlanetCNCInstallDirectory>/Profiles/Default/
you did restart TNG?
it need to be in the directory of your currently used profile, not in the base proflie
on linux, the user that is running TNG needs to be able to read those files
that's normal, you need to create them yourself:
https://planet-cnc.com/adding-user-toolbar-buttons-planetcnc-tng-software/
fi you are interested you can have a look at my configuration, I did...
As far as I'm aware there is no way to remove only a few specific default buttons.
There is a Setting to remove all default buttons and only show those that are configured in the corresponding...
the M6 scripts is basically a enhanced GCode.
the script handles the tool change in the first part and in the second part the tool length measurement.
Where to put you code depends on the wanted...
I belief it depends a bit on your settings.
If you write the tool length into the tool table AND have it set to load the offset from the tool table during a change you should be good.
Its quiet...
Planet CNC is talking about the Measurement Script in TNG. NOT about changes in the Post Processor as far as I can tell.
Go to:
Settings->Programm Options->Scripts->O-Macro
Select o120
Press...
sounds great, looking forward to it.
Any Plans to support VFD Control via modbus for starting/stopping the Spindle and controlling the spindle speed?
And maybe to get some informations back from the vfd?
Especially the spindle Speed...
The mentioned 3d probe is more than worth the effort to change the tool for measurement.
It works much better. Does not require any offsets and works with every material. And you do not run the risk...
Yea sounds like a bad pcb