Search:

Do someone had good tooling experience in cutting plymetal material?

Our stuff consist of a 3/4'' plywood with a .060'' stainless sheet glued to it.

It's for bus floor application.

Any help...

We use the split pinion from Atlanta drives. Expensive but worth it!!

(slammedxonair)I have personal experience with both machine...(magma-joe)I'm not trying to make any sales...We don't make any equipement for the hobby or small business market anyway.
Just want to...

I'n my opinion, all machine are good if they match the customer requirements. We sell small plasma cutting table at 15 000$ and large plasma/drill combo close to 350 000$. Do the higher price machine...

It's easy to do , a simple macro could run the touch-off switch and you can purchase the THC board from wincnc to run realtime THC!!

We use all this stuff on our lower end plasma cutting table...

Personally, i have use Mach2, Mach3, Grex, Smoothstepper, EMC, Centroid and Camsoft.....

We have spend many $$$$!!

After 4 years of testing and reliability issues, we switched all our...

VIctoriaville,Qc,Canada



COMMERCIAL POSTERS IN FORUMS

Because CNCzone offers the use of the "Product Announcements & Manufacturer" forum to notify CNCzone users of new products and/or...

www.electrobf.com

They have the best price performance ratio. They use twin drive on the gantry with a pneumatic pressusre applied tpo the drive unit that make a zero backlash. They use also a...

We are running Grex on all the stepper based router we sell, the only bad thing about it is the poor 3d performance, better performance with pp, but as reliability, no issues in 3 month on industrial...

Hi There,

We have a kitamura Mycenter-1 with an Arm type tool changer. A tech from Fanuc america come here this morning to fix it, he told us that the macro program (9000) are missing.....

Does...

No, i have sent many emails.....

They seems to have a lot of request, they don't reply really often to their email....

We have placed an order on October 14 for a G100, we still not received anything, does somebody had the same problem??

Thanks,
Alex

Well, the problem persit , each time we shut down the machine, when we power-up again we need to readjust the grid shift because the motor is alway in Z overtravel alarm and the tool changer arm will...

EBF in Canada built excellent machine similar to axyz, a typical machine with 5X10, 5HP and vacuum table is 40 000$ CAD with servo drived and convenient pc based controller :) Their technical support...

I have installed a new dnc software, this one ask me to activate the parameter G127.5 in the ladder diagram, does someone could explain what this means?

Thanks,
Alex

Well, a tech from a machine seller here has come to check the config, he told me that everything seems to be ok, he could find the problem :(



I have decided to buy the cable+software kit that...

1990, it had a tape reader with a selector switch for rs-232 mode in the tape unit.

Yes, at this point i press send on the PC side.....


I have tried Cimco, Dncprecision and client terminal.....

Nothing happen on the controller screen....


Note: A friend of mine told me...

I'm trying to send a file to the controller, cable is OK, set-up on pc is OK.

I put the machine in Tape mode, press program the press input, now in the bottom of the screen i have LSK flashing???...

Well, your a pro, i had needed to shift the value from -950 to 3200.


Work fine now, but a lot of work to do , the tool changer arm overshoot.....I may need to tighten the brake and maybe there...

Well, i don't get any manual with the machine...


Could you be more explicit?

What is grid shift?

Thanks ,
Alex

We recently purchased a Kitamura Mycenter-1 but we have a problem with the Z axis. The Home position is a little offset, the tool changer arm hit the head when it came to change the tool, the Z home...

Hi Mariss,

We have used up to 40 of your drive up to now, a great improvement will be to replace the front connector by some better. We have troubleshoot many defective drive or intermittent , if...

I'm proud to introduce our compagny , EBF . We build high quality cnc router in Qc, Canada. We are doing this for up to 3 years now and we never had a down time up to now. The machine quality is...

You could program them with the SMI software to run in step and dir mode, but yes, they are expensive, their servostep series is a little less expensive.

We have studied their application on our...

Tom, their Smart motor are simply animatics motors and their software is simply a version of Jencnc from animatics too, Dynatorch doesn't have reinvented the wheel!!

You will find all the info...

We always monitor the voltage this way, but you need a voltage divider and a bord to communicate to Mach2

Hi,
I'm the owner of EBF Inc in Qc, Canada. We build cnc plasma table, flame cutting, high def plasma table and we offer many option.
We offer complete turnkey systems with installation and...

Ok guys, here the picture of the industrial enclosure we build for plasma table cutting, note the torch height controller already installed in the front of the box just under the flat screen panel.
...

We can sell to you a ready to run control panel with all elctronics, computer, stepper motor and torch height controller for 3995$.

If you are interested, give me your email adress i will send...