525,532 active members*
2,354 visitors online*
Register for free
Login

Search:

Type: Posts; User: mactec54

Page 1 of 17 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: VFD HY 2.2kw 220v wiring to UB1 Controller Help

    Yes PD070=0 for 0-10v control ( 1 ) for Pot control

    PD011=100
    PD073=100
  2. Replies
    7
    Views
    103

    Re: 2.2KW VFD driving 1.5KW Spindle

    How are you controlling the speed from your computer or from the Pot on the VFD Drive
  3. Re: "Industrial" Brand CNC router Spindle descends on shut down?

    If there is no brake of any kind then the motors should be free to turn, after the power is off, need to see some photos of the motors and there connection to the machine
  4. Thread: Mach3

    by mactec54
    Replies
    4
    Views
    31

    Re: Mach3

    New is sometimes good, so you just need the right instructions what machine did you buy or build
  5. Re: "Industrial" Brand CNC router Spindle descends on shut down?

    That means you have not removed the main power which you don't want to leave on all night, if the motors are locked they either have a brake or are still power up
  6. Re: "Industrial" Brand CNC router Spindle descends on shut down?

    If you have a place on the Ballscrew that is not used you could just mount a piece of Delrin or something like it to just cause some friction to hold it in place
  7. Thread: Mach3

    by mactec54
    Replies
    4
    Views
    31

    Re: Mach3

    I'm south of Nashville what do you need
  8. Re: I smoked my HY VFD a month ago. Here is what happened.

    They could only wish that they where MS quality connectors, they are a very poor copy of what is known as aviation style connectors you can buy them for around a $1 each shipped
  9. Re: I smoked my HY VFD a month ago. Here is what happened.

    Your Ignorance has the best of you, it would help to educate yourself on the subject before you hurt someone or yourself

    Electrical extension cord is not suitable for a 3Phase VFD to Spindle...
  10. Replies
    8
    Views
    40

    Re: Properly Grounding Control Panel

    Plasma machines can be problematic with noise seeing you are building it yourself then mount it like it is, Isolated and make sure it is with a plastic bushing around the bolts as well, then add a...
  11. Replies
    8
    Views
    40

    Re: Properly Grounding Control Panel

    They may have your cabinet Isolated because you are using a Plasma Machine, the Machine will be Grounded through the Plasma machine, this keeps the noise from interfering with the electronics

    You...
  12. Re: I smoked my HY VFD a month ago. Here is what happened.

    That can work if the shield is covered if not the shield can cause some nasty shocks if you touch it at the wrong time, it's not advisable to use a shield that is not covered

    Setting the anti...
  13. Re: I smoked my HY VFD a month ago. Here is what happened.

    For starters you have the incorrect cable for the VFD Drive to the Spindle you should not have an open Ground cable, this needs to be a 4 wire shielded cable

    Is the Spindle plugs 4th Pin have...
  14. Replies
    3
    Views
    36

    Re: Dying Huanyang HY02D223B 2.2kW VFD?

    The Bus voltage is DC and will be around 325v Dc for your supply voltage of 230v you can measure this on the Terminals that are for the Breaking Resistor if you VFD Drive has this

    It's not only...
  15. Replies
    197
    Views
    1,896

    Re: Designing a new router called Brevis-HD

    How high is the Table from the floor it really all depends how tail you are, sometimes a low table is good
  16. Replies
    7
    Views
    67

    Re: Limit Switch Noise Fixed!

    So you new where the noise was coming from so why did you not fix that source, before you made the board, there is nothing wrong with you making the filter board, just not needed if you had fixed the...
  17. Replies
    3
    Views
    36

    Re: Dying Huanyang HY02D223B 2.2kW VFD?

    My first thoughts are how is your Power supply would be worth a check, 4 years is quite good for a spindle like this without replacing the Bearings, have you always run it at 12,000 RPM this to could...
  18. Replies
    7
    Views
    67

    Re: Limit Switch Noise Fixed!

    The reason you had noise that caused false triggers is because of bad Grounding somewhere in your system and no Mains Power Filter the filter you made is just a band-aid, the noise is still there...
  19. Replies
    5
    Views
    44

    Re: Saftronics G3 issue

    The caps are most likely well over due for replacement the normal replacement is every 2 years but not many people ever replace them, until they cause damage or take the boards out, which is usually...
  20. Replies
    7
    Views
    67

    Re: Limit Switch Noise Fixed!

    No it fixed your limit switch problem, the noise is still there are you using any EMI Main Power Filters as this normally will solve most EMI noise
  21. Re: Chinese G Penny Spindle - anyone tried one?

    Palmerston North and Auckland North shore area thinking of selling the Palmerston North Buildings and get a Beach property some where between Tauranga and Keri Keri
  22. Re: Chinese G Penny Spindle - anyone tried one?

    Here are the adjusted Parameters using 380v

    PD008=380

    PD009=176

    PD010=25

    PD141=380
  23. Re: Chinese G Penny Spindle - anyone tried one?

    The Phases don't always have to be correct, but for some reason with a lot of these spindles they have to be as per manufacture spec's, and if they run the wrong way most VFD Drives have a Parameter...
  24. Replies
    262
    Views
    1,299

    Re: Canuck's HD Metal Monster

    Nice work

    You can increase the voltage to 52v if your power supplies will all balance this will give you a little more RPM I mostly run my old Dyn2 Drives at 50v just adjust the power supplies...
  25. Replies
    2
    Views
    30

    Re: How much air should a VF2 use?

    It will depend if you have an oil mist spindle then it uses 17 PSI while it is running, if you put your hand just below the spindle you will feel the air coming out this keeps coolant and chips out...
  26. Re: Chinese G Penny Spindle - anyone tried one?

    Here are the basic Parameters that need to be set, check that the U V W wiring is correct as per manufacture requirements and no you should not be just plugging it into the wall or you can damage the...
  27. Re: how to make micro grooves for DGS seals?

    Etched or EDM, this type of etching is very limited in some materials, so EDM would be then the only way looking at the texture on that part, you would EDM the part and then Grind the face to the...
  28. Re: Chinese G Penny Spindle - anyone tried one?

    It is bumpy because you don't have the parameters set correct or wiring is incorrect, the manufacture will not have the Parameter settings only a rough guide is all they can offer

    You have to use...
  29. Replies
    135
    Views
    1,414

    Re: Chinese 2.2kw spindle burned out?

    How can the motor throw a big spark it's an AC motor if you had a short in the wiring then this could cause some harm to the drive and maybe cause a spark, don't blame the drive it sound like you...
  30. Replies
    18
    Views
    26

    Re: Enable, direction to FWD,REW

    Not in his control setup
Results 1 to 30 of 500
Page 1 of 17 1 2 3 4