543,717 active members*
2,354 visitors online*
Register for free
Login

Search:

Type: Posts; User: brittf

Search: Search took 0.00 seconds.

  1. Re: Pneumatic Power Draw Bar for Shopmaster Mill Turn - DONE

    The forum has been really sluggish today and I was not able to upload pictures. If you want to private message me with an email address I'll send the pictures to you.

    Did it make a difference and...
  2. Re: Pneumatic Power Draw Bar for Shopmaster Mill Turn - DONE

    Thank you for the reply. I built a more rigid base out of 2 inch square tubing with 3/16" wall thickness. It is diagonally braced on three sides. I also built what I call an exoskeleton out of the...
  3. Re: Pneumatic Power Draw Bar for Shopmaster Mill Turn - DONE

    I like this. I have the same Shopmaster Mill Turn with an Acorn conversion. Can you provide me with the part numbers for the pneumatic cylinder and the belleville washers? Looks easy enough to build.
  4. Re: Configuration files for a Millturn and Darwin

    March 6, 2020

    NDBoyd

    I'm not able to help you. I scraped Mach 3 in favor of Mach 4 shortly after I received my machine. I wanted to run a newer computer with a later version of Windows (I run...
  5. Thread: Mach4 upgrade

    by brittf
    Replies
    8
    Views
    1,365

    Re: Mach4 upgrade

    February 19, 2018

    Joe

    Did you get your problem resolved? I switched to Mach 4 about a year ago. What motion controller are you using? I'm using UC100 USB motion controller. I believe there is a...
Results 1 to 5 of 6