Hi guys,
I'd like to use one of my 60 degree 0.25" v bits to do the rough work on a small branding stamp I'd like to do, and then where the 60 degree 0.25" can't reach, to go in with a much...
Type: Posts; User: ElliottG
Hi guys,
I'd like to use one of my 60 degree 0.25" v bits to do the rough work on a small branding stamp I'd like to do, and then where the 60 degree 0.25" can't reach, to go in with a much...
Hi guys,
Using Vectric Aspire.
1. I'm just curious if there is a way to tell the what the ACTUAL depth of cut will be when a vector for example has small letters on it, and the dimensions of...
Thanks!
Thanks for replying!
I only run around 4000rpm (old tired iron :o) since it is a real mill and not a router. Cutting in aluminum. Around 15 IPM in X and Y, and 6 IPM in Z. Total depth 0.125",...
Thank you!
Hi guys
I'm hoping this isn't a long shot, but I was hoping to find the software that was used to create the picture in this image:
https://i.imgur.com/0LsxmHR.png
I think it's some sort of...
Hi guys
Not new to CNC, but new to ArtCam. I've managed to cut out a few things and it worked quite well, but at this point I'm trying to design a branding stamp I will use for leather, here is...
Right. It's just finding everything in Mach 3 that's a pain.
Anyway the problem has been solved. I will edit this post with the solution in a couple days.
Thanks.
I will try disabling things...although I'm not sure that's going to help.
I have read the portion about installation and have followed it down to the letter with no success...
Also,...
Hey guys
Super weird thing happening with my new setup. This is a setup I got from someone else that had it working perfectly with his computer, yet I have problems with my computer.
Computer...