I am running a highly modified emco pc turn 105 (Bigger Chuck, moved spindle and tool turret out and down, custom tool holders giving an extra inch reach up and down on X axis.). Running Fusion 360...
Type: Posts; User: axefxpwner
I am running a highly modified emco pc turn 105 (Bigger Chuck, moved spindle and tool turret out and down, custom tool holders giving an extra inch reach up and down on X axis.). Running Fusion 360...
I tested the chuck with no dogs in it, above 1350 rpm the chuck doesnt want to brake properly, so 1350 is my limit. Runs fine at that rpm and am able to cut alright on aluminum. This machine will...
So the machine still knows X0 because it technically hasnt changed. I moved the chuck and turret uniformly to create room for the chuck.
Hello, I'm in the process of configuring Fusion 360 to work with Fanuc 21-tc on my Emco pc turn 105 Lathe.
This lathe has been seriously modified, 8 inch chuck (2.5 times larger than original),...
Hello, I have a highly modified Emco PC Turn 105. The chuck has been moved out and down 1 inch to accomodate a bigger chuck. Thusly I have also built custom tool holders to hold tools either +/- 1"...
Great conversation going on here, I think I've decided to go with the 1.8kw DMM as well, and plan to run it around 3hp 12k-15k rpm as well Quinn. I am currently on the hunt for a spindle and...
Hello, I am the owner of an Emco PC mill 155. I had to reformat the original computer as it had a corrupt bios, and i rebuilt it with a new motherboard and hard drive.
uc
Upon installing WinNC and...
Hello, I am looking for various different sizes of Schaublin ESX-16 Collets, for an Emco PC Turn 105, or advice towards what would be a useable alternative Collet that is easy to find.
Also, if...
Thanks again! I should have clarified earlier, I intend to have the servo's/steppers on the axis' be direct coupled, and intend to use either a 750W or 1.8kw DMM for the spindle motor, which would be...
Thank you for the input! That’s exactly the kind of input I was looking for. I will go ahead and grab the DM80i drivers and Stepperonline steppers.
I meant that I was thinking of doing the 1.8kw...
Hello!
I am in the middle of a small/med mill build (14x7.5), and am looking for advice on my axis motors.
Here is the mindset - I want to get set up nicely with steppers as cheaply as...