Search:

Hi there, you could use a standard router 4 or 6mm router cutter.
Just make male and female slots like dovetails. You will need to finish the square corner off though with a chisel.

Mawdew,

Are you having the problem once you have sent the program to the machine if you look at the program I have attached it has RB in black at the beginning then under the program it has C D T...

No worries Brian

Shaun

Hi Chris,

I don't use drip feed.
The programs i use are stored on a server called (k drive).

I don't store any programs on the control.

When the programs are opened up in panel mac and run...

Hi Brian,

On the demo the alphacam bit is when you see the first cad part.
Then the program is sent to the post processor.

Then it was opened up in alpha edit. This is alphacams editor.
Then...

Brian

Demo attached

Shaun

Hi All,

Does any of you lot use Xilog or Xilog plus.
If you need any help just give me a shout regarding Xilog or Xilog plus.

Also I have an alphacam post processor for the NUM 720, NUM 750,...

Hi there.

I always use G4 F4 for dwell.
Try it yourself.

The G4 calls up the dwell and the F is the time in seconds F4 being 4 seconds.

Shaun

Brian

I've attached some sizing programs which use different edges.
I made them all parametric so they all work from the piece parameters.

The main two which i use are the (size) program and...

Hi Brian,

I've opened your program up.
I looked at the listing and you are right it does keep putting Z0 in.

Click the mllings section with the mouse so you see all program lines then go to...

Brian,

I've used some camera software and done a step by step of how to use the piece variable in a program.

The transposing just means putting it into the program.

What you'll have to do is...

Sorry Brian,

It is actually (variable r) not (variable v).

If you go into the program for k2.cnc
Once you have opened At the top go into piece parameters then variables r. Open it and there...

The thing about parametric programming is to basically make it as easy for the CNC operator on the machine so that he doesn't have to do very much if anything at all with your programs.

Normally...

Hi Brian,

It does work when you want to find and replace.
Just go into the edit icon and click replace and then put in the item to replace and then under neath put the new item and then click...

Hi Brian,

I used to save a lot of universal programs in the editor.
I found that manually there wasn't a fantasticly easy way apart from saving similar programs and slightly amending them.
...

I've attached the woodwop post it does say english version,
but when you open the post its nearly all in german apart from a few things which are in english.

I did have a different post for wood...

Ive attached a jet post.

Ive never used this post by the way.
We got rid of the machine before I could use it.

The file is a text file.

Once you get the file to your pc change the (.txt) to...

Hi there,

I've attached it as a text file.
When you get it to your pc change the file name from (.txt) at the end and put in .arp

Then you can open it in alpha edit as a post.

When it...

Hi there.

If you still require a post for either the "Busellato Jet5 Genesis Evolution ver3[1].4 M1" I have also "HomagWeeke Woodwop 4.x english V5.0"

Let me know and we'll see what we can do....

I've been using alphacam now for 13 years.

I don't think there is anything on the market thats as good.
Especially now with the feature extraction.

Being able to get hold of designers 3d...

Hi there.
I have an alphacam post for a 840D contoller for a Vision1 Reichenbaher.

Let me know if this of any use.

Shaun

Hello there i have a post for a WADKIN UX two head router with four drills for CC120.
I adapted it slightly to suit our machine at the time.
The adaption was just to tell you the operator several...