Search:

Yes it is at an angle that means it get out of the way ie not over the table.

I now have sold the Tormach to a guy that already had the same model and to get the price down he wanted it without...

Is there any way to find the spindle hours from new with a PNC 1100 series 3

I think I read some ware that it might be a parameter in the VFD !!

Edit:- ...

I agree with Gerrit. Just edit the configs/tormach_mill/tormach_mill_base.ini. There are too many links from python that I personally don't understand.

On my 1100-3 which use a mesa 5i25 i have...

Not sure if you are correct Rod.

On my Tormach the ini file is all in inches and to make it work in metric you just use a G21 in the header file in the Gcode.

(Solved)

I was using the Tormach USB to flash another drive in a different PC to that of the PC on the Tormach
when I flashed with the USB with the drive in the Tormach PC it found the 5i25

478814

Ok my hard drive went down I have the USB from Torrmach and and flashed another drive with it.

The problem is that when it it booting it pops and error say something like "check the ethernet...

It might help if you said where you are in the world as prices will depend are where you are.

Just an update. It seems to be working fine, now just have to clean the wiring up and fit the air blast..

This is with 12 tools disc. This vid is part of 30 tool changes without issues
...

I decided to go with David Loomes board and code for the tool changer

For amusement only : https://www.youtube.com/watch?v=IDtViBLOPpk

I need to make some adjustment to the retract height.

...

Thanks for the info.

I have located and copied the halshow.tcl from another distro.

I am have trouble finding ~/tmc/tcl/bin in PP

operator@tormachpcnc:~$ cd ~/tmc/tcl/bin
bash: cd:...

As the tittle, how to get halshow & halmeter with PP V2.0 Tormach 1100 s3

The disc is 180mm But is drilled for 14,15,16 tools I ended up with 15 because of clearance issues with the column . But other things come into play.

If you look at the vid. in the first post...

Ok I have now built most of the ATC for my 1100 S3 and would appreciate any help re coupling it up to PP.

https://photos.app.goo.gl/K2vjxMfK9cvhTLhu5

This has 15 tools I could cut it back to...

According to this article

I believe that they use 3 phase steppers

https://www.youtube.com/watch?v=diCvwvHoCvg

Thanks for the encouragement, I need it :cheers:

Would this be the correct board

...

I have purchased the fusion file from David (youtube) and started to build the ATC with 12 tools for the 1100 S3

This might take me some time

461366

Hi will you by any chance be parting with the code for the FT232R :drowning:

I am looking for a schematics manual for a Hurco BMC 40/M with Yaskawi drives

@Step:
It might be a mistake in the listings as there are other types there that are only about £2.50 postage.

Thanks for the offer.
Clive

I found these but the postage to the UK £35 https://www.aliexpress.com/item/1005001511793017.html?spm=2114.12010615.8148356.6.72474f078OgkRv

@Paul-DB

Very nice, do you have a dxf file for the plate :cheers:

This is a shot in the dark:

For example if your config already has 3 pid loops for controlling your axis and you want to add a 4th one.
Change the line:
loadrt pid num_chan=3
to
loadrt pid...

Very nice. It has caught me out once. Do you by any chance have the file for it? Please

Thanks yes they were there .

I am looking for the machine cad files but

re this page https://www.nyccnc.com/tormach-solid-model-machine-cad-files/ I am getting a 404 error have they been removed

With further investigation the pins to use are pin 4 and pin 5 looking at the front I have use NC contacts. So this is now solved thanks to all for the feedback.

Thanks for the info. My machine only has one Din socket. I would have thought that the Tormach setter would have a safety second switch in case the first one fails for some reason

The same...

PP din socket for tool setter.

I have a tool setter non Tormach but looks the same mine does not have a led only to switches one for the tool trip and the other NC for the over travel fault.

I...