Search:

Hi all,
I have mori seiki mills SV50-401 with control msc-518 ,
When hit OFFSET/SETTING key and hit right arrow soft key don't appear macro screen display.
How enable this screen?

Hi every one,
On fanuc 18i , in OFFSET/SETTING SCREEN when perss rightmost soft key { > }, display don't change and Macro variables display screen don't appear !!!
How i can enable Macro variables...

Hi every one
We have a Milling Machine model MAHO MH 1600S,unfortunately rotary table of machine has some problem,then i need drawing manual for rotary table.
thanks

Hi every one
We have a Milling Machine model MAHO MH 1600S,unfortunately rotary table of machine has some problem,then i need drawing manual for rotary table.
thanks

Dear razor_amd
I have maho MH800P, and i need electrical schematic for machine and for BBC Axodyn 05LE10d-E (GJR5 1064 00 R1 | 05 LE 10 d-E).
can you help me?

Hi every one
We have a Milling Machine model Mikron HSM700 and the controller
is heidenhain Atek HS plus.

At present, some of it's electronic boards of Atek control are out of order.
I will...

Hi,
I have milling machine, maho 800p with Heidenhain TNC125 control,unfortunately i lost electrical plan of machine,does anyone have it?
Thanks,

Hi every one
We have a Milling Machine model Mikron HSM700 and the controller
is heidenhain Atek HS plus.

At present, some of it's electronic boards of Atek control are out of order.
...

I checked M25/M26 but I didn't see any reaction. I think one of the keep relay (K pmc parameter) is not active.

tailstock is manually,we can move it only forward or reverse with pedal.

I want to know that, which M codes is for tailstock ?
My machine has live tools and C axes and tailstock.

I have a mori seiki SL_15m with fanuc MF-T6 control ,I don't have any operator manual .
Does anyone have the M codes list for this?

I take all the live tools out and test it ,but i have problem so.
How i do milling spindle orientation alignment ?
Do you have any electrical diagram or plane for mori seiki SL_15mc ?
Thanks a lot.

Dear every one
I working with mori seiki 15mc lathe ,some times when I want tool change ,turret
coming out and some rotate suddenly machine stop and i have message :

EX0453 MILL SPINDLE ALARM
...

Dear every one
How i can read input of PLC in part program (NC program) on fanuc controls ?
for example on siemens controls for reading input in NC program we can write this:

N10 G1 X14 Y35
N20...

Dear every one
I have machining center with HEIDENHAIN iTNC530 control ,when i turn on machine ,i have {exchange buffer battery} .
I want to know if i exchange it ,parameters and program of...