Hi thank you for replying. I have built the system but I have no LCD readout and several functions don't work. I have double checked all my wiring and seems ok. I suspect its because i am using the...
Type: Posts; User: stroheim
Hi thank you for replying. I have built the system but I have no LCD readout and several functions don't work. I have double checked all my wiring and seems ok. I suspect its because i am using the...
Hi that's very kind of you. First is there any difference between the standard prototype and Nicholai67's board. Second I am using a standard type rotary encoder square wave do I need to short out...
Hi thank you for your reply I may need to revert back to older version if I cant get information...many thanks though
Really good work. I built the earlier version ok but I thought I would go with latest version and I have nearly finished but I am a little confused with the encoder both manual and rotary. I have a...
Hi ; the joystick stays in the chosen latched position and doesn't spring back. I haven't used the reset button so I wouldn't fit it as just turning off resets
Hi in UK/Wales/Porthcawl
Hi please see picture on controls. The project was possible with the help of Richard Edwards
Hi I used a Prototype screw shield which made things easier . The z axis is driven directly 1:1 on to the leadscrew (nema 23 ) and the crossslide x axis is also driven 1:1(nema17) the encoder runs at...
Hi thanks that clears things up
I have built the earlier version 7c which works quite well and I am contemplating maybe building the updated version. Not sure about the joystick on the updated version as mine is a latched one with...
Managed to complete the Russian ELS with lots of help from Richard Edwards. I am really pleased with it I can screw cut to a shoulder, auto threading ,cross slide feef tapers,facing, 4 electronic...
Thank you very much
Hi yes I meant the Rocketronics. I like your setup and once again thank you for your advice. So you got the case with lcd and operation board together with software. Is the layout on the lcd in...
Hi thanks is it possible to just buy the case and board as I have most of the other bits..thanks
Thank you very informative may look at the Rocketronics
Can anyone help me to compile a arduino sketch or have one ready compiled using a rotary encoder ,stepper motor, driver. I like the Russian sketch but it runs two axis and as I mention only want the...
Hi can anyone help me please. I looked at the Russian sketch lead screw and it looks very good but I just want the screw cutting and feed facilities and not being that good at modifying the sketch...