Search:

Those of you on the West Coast may be interested in the following -
http://www.moriseikius.com/DTLGrandOpening/index.html

"Thank you for your interest in the Grand Opening of the Digital...

Do either of these help??

http://www.meau.com/functions/dms/getfile.asp?ID=025000000000000001000000484400000

http://www.meau.com/functions/dms/getfile.asp?ID=025000000000000001000000484500000

Par. 1201 bit 7 is WZR -
Upon reset, the workpiece coordinate system is:
0 : Not returned to that specified with G54
1 : Returned to that specified with G54

bit 0 is ZPR -
Automatic setting...

More specifically, try this -
...

This is one place -
http://www.meau.com/eprise/main/sites/public/DOWNLOADS/default

It entirely depends upon whether or not Bridgport implemented "tape" mode on the machine.

If they did, it should be clearly labeled on the operator panel where all of the mode selections (EDIT,...

Another possible cause may be a jump function prior to the logic. Any logic placed between the jump & jump end functions won't be executed to completion when the jump function (SUB 10?) is enabled.

The only time I've ever seen this on a Fanuc control is when the output is written to in two different rungs.

I guess I'm still a little skeptical about wireless on the shop floor, due to the potential high levels of various types of electrical interference present. In most cases, if the machine tools will...

Looking for someone (preferably in S. Indiana, S. Ohio, or N. Kentucky) to sub-contract integration of safety related devices (POSMON) on Siemens 840D controls. Contact...

On the machine? No. There is a PMC cassette in the machine (looks like an 8-track tape) which contains the EPROMS / Ladder. This must be erased and re-programmed outside of the machine (typically),...

Most CNC lathes require a hardware option in order for spindle orientation to work.

The ability to orient the spinel may very well be an option. It isn't apparent by your post (unless I missed soemthing) whether the machine is a lathe or mill. If it is a lathe (which is mostly what...

All of the settings below are in the Parameter manual for this control.

Parameter 0100
Bit 1 (CTV) Character counting for TV check in the comment section of a program.
0 : Performed
1 : Not...

We work with gages from a variety of manufacturers every day and like machine tools, the general rule can usually be applied that you get what you pay for.

Did you receive this list yet?

Sorry, but the ability for the user to enable options does not exist on this control. They must be purchased through Fanuc, or the machine tool builder.

In order to drip feed the 10 series control the address G12.4 must be activated in the ladder. This is typically done throught the mode switch that selects MEM, MDI, EDIT, etc.

If it is not...

I am fairly certain that this information is present in a data table address (D380?), but not written to a macro variable. In the drawings for a SH500 that I have, X12.0 and X12.1 are the inputs that...

If the control is equipped with a tape reader a BTR may provide the solution.

See - http://www.rym.com/manufacturing/Hardware/btr.html

for an example

What you desire to do can be done through the use of Fanuc BOP software on a PC and an ethernet connection to the machines (assuming they are equipped with one).

I would suggest you contact your...

Rather than allowing the conversation to get off track, let's go back to your original scenario.

It seems to me that you are pleased with the current software you are running and are simply...

If the machine is a Muratec, in all likelihood there is no ladder. Most of the Muratec machines we've worked on with 18i controls have the sequence programming done in C language. All that is...

"System variable 3002 functions as a timer that counts in 1–hour increments
when the cycle start lamp is on. This timer preserves its value even when the power is turned off. When 9544.371767 hours...

To the best of my knowledge, there is no way to read parameters into macro variables on a Fanuc control. Timing an event and storing it in a variable may be the easiest and most cost effective method.

Haven't seen the other thread so I apologize if some of this has already been covered.

1) Can you send in the opposite direction (CNC ---> PC)?
2) Did you ring out the cable or does it work on...

The biggest challenge here (if I'm not mistaken) is that converting the PCMCIA slot to anything else (wireless RS-232, Ethernet, etc.) will require that you load drivers to support the device. Being...

I've seen USB to card adapters and card adapters that can fit in a drive bay. I've also seen PCMCIA to RS-232, but don't recall ever seeing it the other way around. IF anyone offered them, it would...

Daniel,

As you're aware, we've sold and installed a variety of tool monitoring & adaptive control systems over the years. If I understand you correctly, what you have designed sounds like a very...

What is the M31 supposed to do?