Search:

It depends on different brands.

I think Mastercam can do it.

Many many in China.

Other brands ok?

It is suggested to use the original brand and model.

Nice

MasterCam es más fácil.

Maybe only some parts inside broken, find and replace it would work.

Steppers should be enough for this small machine.

Replacing motor & driver is recommended.

I think the processor is same with Fanuc.

Nice works.

Yes, there is one kind of RS232 to USB port, I used it before.

Sounds reasonable.

What is the CNC controller are you using, is there any alarm or anything else?

I think no need 5 axes.

Still using Master Cam

Case by case

Should be steps missed problem.

Prices for distributors and end users are different, maybe this is the reason they hide.

Waiting for the finish one, and see how it works.

Sometimes it is machanical parts cause the noise, like coupling connection or axis.

Yes, just set the parameter right, then you can do that.

Adjust the tempreture of AC to 26 degree, use public transpotation as more as possible, do whatever you can do to save this planet. that is my goal

It depends on how skillful of this machinist, many companies need a machinist can solve problems, not just find out the problems.

Transform it into CAD or CAM file first.

I used to use single axis controller to control my bar feeder for CNC lathe.

Change to AC servo motor and drivers

If for lathe or milling then I can give you some recommendation, not punching.

You may check the battery inside the controller, sometimes the battery dead will cause the problem.