This procedure is made by the PLC !!! If the creator don´t think about that and don´t write in the plc program, you will have this problem all life !!!!!
Type: Posts; User: xavierdemoura
This procedure is made by the PLC !!! If the creator don´t think about that and don´t write in the plc program, you will have this problem all life !!!!!
You can use ISO VG 32 !!!
Tomorrow i will try and tell to you.
Thanks
Girishdk,
Thanks for your attention.
1) The Fagor linear scale is type MX. It´s TTL 5 V.
2) The servo drive is MDS-D-SVJ3
3) The motor has absolute encoder. I change the system to...
Anyone put Fagor linear scales TTL in a Mitsubishi M70 control ??? I need put this scales in Litz Machine and i was having some problems like compatitbility and parameters !!!
Thanks in advance
...
Please, check this signal in PLC screen : (DB31 - 48, DBX 2.1). This signal is the enable/disable drive.
Turn in CW direction and press the MESSAGE key to confirm the exact alarm number
When you turn in CW mode, what alarm´s appears ???
onthebumper,
Today i do the ethernet communication and find the MAC address. Thank you very much. Work very good.
Daniel
We have a machine that has M70 control. To comunicate the M70 control, Mitsubishi have a software that name is CNC Mitsubishi Explorer that comunicate machine with PC. In machine we adjust some...
Aircraftman,
Try do an complete interpolation and check the diameter. See if the interpolation will be problem in the diagonals or in the quadrants.
Daniel
Aircraftman,
I think thats maybe, its possible backlash. I never see somthing like this, for example, like you said, with cutter comp on, square no good, if you use cutter comp off the square is...
Nelz,
Ok. When you put M10, its ok, you hear the sound of the valve, but you say "trying to do something". In this moment, the collets needs open or closed, depends of your ladder sequence. The...
Nelz,
Check first the solenoid valve !!!
Daniel
Chippy,
Tanks a lot. Today i found the problem. There is a wrong parameter. 2073 is the address to reference point. The value to 4th axis is 0. Never will do the reference with this value.
Best...
Chippy,
I check the parameters 2031/2032. They are ok. In the plc dont has the signal R272 bit 3. When i force that, the 4th axis turn rapid, is is 0, the 4th axis turn slow. The signal, X803...
BKCOM,
I dont know the password, but if you send the ladder program to me, its posible i broke the password.
Best Regards,
Daniel
[email protected]
Chippy,
I will check that !!! Thanks a lot.
Daniel
BKCOM,
You have any ideas to do that ??? I has the same problem ???
Best Regards,
Daniel
Hi people !!!
Today i had an problem experience. I had install an four axis in a vertical machine tha comes from LITZ !!! The 4th axis comes from GoldenSun. The connection of power and encoder in...
Gearmachinist,
Here i do maintenance in Yang machines ans we have a lot off problem´s like that here. 3 machines, 1 machine only solve the problem when FANUC change the motherboard the other 2,...
Ugene96rs,
I send to you the e-mail. Edit/display the password is 81620 and only to display is L
Best Regards,
Daniel
Ugene96rs,
Send the ladder program to me.
[email protected]
Daniel
PVE,
It´s possible you send the ladder program to me ???
[email protected]
Best Regards,
Daniel
Alexcomo,
Send me e-mail !!!
[email protected]
Daniel
Hermle UWF851,
Try PRM393#5 (STOVO)
Best Regards,
Daniel
Some MTB use M30 to "Auto POWER OFF". And they work with to M30 or M02 in ladder program to RESET (G8.6 and G8.7). Some MTB´s use the same to reset the program. (variables and rewind)
Daniel
1) Move machine to the mark´s.
2) MDI Mode
3) OFFSET/SETTING 2x
4) Parameter Write Enable to 1
5) SYSTEM
6) PARAM
7) Press 1815 and NO.SRH Softkey
8) Bits #4 and #5 of B Axis need stay in 1...
Padobranac,
Try change D109#5 to 1 to stop spindle rotating and coolant.
Daniel
Dan,
1) C-Axis is the living tool or the spindle ???
2) Using system variable #2601 you modify only the tool geometry to shift the Z axis.
Daniel