Search:

This machine is a special design machine, which with 4 axis part and rotary part. For the 4 axis part, the spindle can rotate 180 degree, can work on different curve surface; for the rotary part,...

THE FOLLOWING IS THE NEW 3 AXIS WOODWORKING CNC ROUTER RC1325H, THE Z AXIS IS HEIGHTENED TO 500MM. THE STRUCTURE OF THE MACHINE IS MUCH STRONGER THAN THE COMMON MACHINE....

The following is our new ATC CNC router RC1530-ATC with working area 1500x3000x250mm, it is with linear tool changer and Taiwan Syntec controller....

THE 4 AXIS CNC ROUTER WILL BE SHIPPED TO CANADA...

The machine is our new 4 axis EPS CNC router for processing the large foam and wooden models. the working area is 2600x4000x1300mm. And the spindle could rotate 180 degree, very suitable for working...

1. Press set button for about 3sec, it will show you a time value for minutes, this means how long of the interval it will lubricate the blocks, you can press up and down to set the time, then press...

The CNC Router RC1325TS is with working area 1300x2500x200mm, the three spindles work seperately, and can be automatically changed. Besides, each spindle connects one dust hood, which can give a...

http://www.cnczone.com/forums/attachment.php?attachmentid=293764&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=293766&stc=1

The machine is only with double rotary system, each rotary can carry 1500mm length & 500mm diameter round materials....

The 4 axis Aluminum Machining Center RC1240SA which is special for aluminum profile processing, the spindle of the machine could rotate 180degree, which is very suitable for side work. And it is also...

The New 3 axis CNC machine RC1005 with movable table & linear tool changer, the working area of the machine is 1000x500x450mm. The machine is specially designed according to the customer's...

New Woodworking 4 Axis CNC Router RC1325RH with working area 1300x2500x400mm, the spindle of the machine could rotate 180 degree, very suitable for side work processing, like the side drilling, side...

Multifunctional CNC Router RC2030-EOT with Germany EOT-2 & TCT-1 and CCD function...

The New machine RC1530 is with working area 1500x3000mm, it can do 2D & 3D engraving and cutting on the wood, plastic, MDF, brass, aluminum and so on. The standard Z axis working area is 200mm.
...

How to update the DSP system when the DSP handle could not read the U disk? Please have a try according to the following steps:

1. Put the update file in the computer.
2. There is a...

High Quality New 4 Axis Woodworking CNC Router RC1325RH Without Auto-tool Changer, the spindle of the machine could rotate 180 degree, which is very suitable for processing on different curve...

New Woodworking CNC ROUTER RC1640 With Double spindles, one of the two spindles could rotate 90 degree, which is very suitable to do some side work....

For the machine with automatic tool changer, if the tool magazine could not push out, what is the reason?

The reason may because the brush isn't risen up to the highest position. So please allow...

For the machine with 9KW ATC spindle, if the spindle speed is 18000RPM, how to change the spindle speed from 18000RPM to 24000RPM? Please check the following:

Please check the panel of inverter,...

http://www.cnczone.com/forums/attachment.php?attachmentid=283420&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=283430&stc=1http://www.cnczone.com/forums/attachment.php?attachmentid=28...

The CNC router machine 2040 with ATC was shipped to Slovakia last week...

The CNC router RC1325-ATC with linear tool changer
With hard steel structure, the CNC Router wood machine is fit for hard wood working, like cutting and engraving on rosewood for furniture, indoor...

For the Syntec control system, if you need to change the system into imperial units, please check the following steps:
1. After you open the machine, please press the “ maintain” of the screen.
2....

The machine RC1631S-ATC is with the automatic tool changer, it can realize the automatic tool change function and can change 8 tools one time. And the working area of the machine is 1600x3100mm, the...

The machine RC1325H is with working area 1300x2500x650mm, considering the Z axis is too high for the machine, we use the special structure to keep the machine stable when processing.
...

277350277352

The machine is with double spindles and rotary, each rotary can carry 500mm diameter & 1500mm length round materials. They can work at same time and do the same work.

277348
This method is update by handle operation, don't need PC. Update file is *.PKG. Step is as below:
1. Save update files to U disk, insert into handle
2.Press" MENU", select" system setup"...

277070

Brief Introduction
1. This machine is a special order from our costumer :A. gantry moving,high precision B double table, to feeding conveniently.
2. With hard steel tube structure,...

This method is update by handle operation, don't need PC. Update file is *.PKG. Step is as below:
1. Save update files to U disk, insert into handle
2.Press" MENU", select" system setup" press...

Woodworking CNC Router Machine RC1313 with working area 1300x1300x200mm. For the machine, we use the mach3 control system and Servo system. It can do 2D & 3D Cutting and Engraving on the wood,...