Take a look in your parameter book. If I remember correctly, you should find what you need around #9924.#
Good luck friend,
JR
Type: Posts; User: Jarwalcot
Take a look in your parameter book. If I remember correctly, you should find what you need around #9924.#
Good luck friend,
JR
Clean the limit switches.
Check the voltage at “NCON” on the PSU. I believe you will find below the necessary 24v.
The fuse of the DC link has blown (the voltage at the DC link is insufficient). This alarm is checked when emergency stop is cancelled. 1) If this alarm is issued during spindle operation (rotation)...
Disregard, we were able to the Mazak software to work with Windows 10.
JAR
Good Morning,
I’m trying to set up a laptop to back up programs and parameters for several different control types (okuma, fanuc and mazak-none eia). Can anyone recommend software that will allow...
Hope this helps!!
904.1 German/French Display
JAR
Congratulations on your first CNC. Glad to see someone make a commitment (have the balls) in a tough manufacturing season. Look under my uploads/documents and you'll find things that will help you....
I have a company here in Georgia wanting to sell their Vulcan 1000B 5' x 10' plasma. Would it have the same control? If you think it might work send me a PM and I'll give you my contact info.
I...
Ivan,
Let me know if you are looking for something other than the attached info.
Take a look at the attachment...
Good Luck
Try this procedure first...
See if this helps you any...
Good Luck,
Online Op-Manual: http://www.countyhistory.com/rbcreations/ron/operations.html
You might find this link useful: http://mtsspecialservices.homestead.com/techbulletins-lathe-axis.html ...
Cheers,
I thought some of you wouldn't mind knowing about this: http://www.countyhistory.com/rbcreations/ron/operations.html
Hope it helps someone out there.
JR
PS: Send the guy a thank you if you...
I may have the machine for you. A friend of mine in AL as the perfect machine for you. If you wouldn't mind sending me a PM with your contact info, I'll pass it on.
Regards,
Glad I could help.
See if this file helps any. " http://www.cnczone.com/forums/attachment.php?attachmentid=48482&d=1197529070 "
Good Luck!
MKA,
Are you having trouble with your RS232 connection?
Auto,
Take a look at PartMaker.com... I'd be interested in hearing what you think.
Regards,
Tampa-Dan,
I have a customer up here in Jonesboro, GA (Near the ATL Race Track) that has a machine that you may be interested in. If you send me (via PM) your contact info, I'll pass it on to him.
Try leaving the end point blank (0)... I'm thinking it will calculate that for you.
I'm working off memory here... Try not inputting an end point. IGF will calculate that for you as long as you have the radius called out. If it doesn't, check your IGF parameter's.
Let us know...
http://www.cncci.com/resources/articles/CNC%20basics.htm
No problem!
That was just a poor attempt at trying to be funny!
:-)~
Check that... Howd, here's the file I was talking about: http://www.cnczone.com/forums/attachment.php?attachmentid=22084&d=1157050459
You tell'em broby!
Put,
Contact your local Okuma dealer and order an "Operator Pocket Book or Guide"... It has tons of data in it... As for the OSP-7000M... Depending on the year, you should be able to find most...
Kevin,
This was sent to me when I was having some trouble with an older 3T machine. Hope it helps.
Good Luck,
JR
The Fanuc 3T uses parameters 005 and 068 for the "device 0" serial port....