"Data mismatch? sound very familier. If I remember correctly, the program heading had been alter. For every control, the heading is difference, even though 3digit structure is the same. Double...
Type: Posts; User: fbergski
"Data mismatch? sound very familier. If I remember correctly, the program heading had been alter. For every control, the heading is difference, even though 3digit structure is the same. Double...
Thank you for the tip. Problem solved and programs back in the macine :).
Philip
This is where the problem is, we get a 521 Data Type Mismatch alarm. Mazak apps cannot figure it out yet. Trust me I've tried sending back through the h/d and usb I/O functions and we get the same...
You are correct, we have fixed the problem but I am left with the programs in 3-digit g-code. I need them converted back into the Matrix format.
Philip
I have about thirty programs that were incorrectly saved using the "text" format under Hard Disk I/O. This converts the programs to 3-digit g-code and for some reason my Integrex will not read them...
I solved the problem by properly installing the pcmia network card. You'll need the keyboard attached to your machine to do this.
Philip
I can transfer programs on all machines using the pcmia card slot on the front of the control. The issue is that on the four machines the "I/O folder" is grayed out and I cannot select a shared...
Do any of you Mazak gurus know the parameter to turn on the hard disk I/o feature for the Fusion 640T control? We have six machines in our shop, two of them are QT200's and they have the ability to...
I have a QT200 with a Fusion 640t controller. I've networked it to a network and everything works fine. The only problem is when I use the "Hard Disk" feature and save a file to the network it...
Problem fixed, thank you for the help :).
Philip
I need to connect a pc keyboard to my QT200 with a 640 T control. For some reason I was not able to install the pcmia network adapter and when I rebooted the machine it came up with a error. If I...
Hello,
I need to network my Fusion controls to a central server and have some questions. At my facility we need to store all programs on a designated server folder and pull programs as needed...