Just check it at Rhino 7. Guess 8 must be same
Go to Tools-Options-View-Display Modes
Choose desired display mode. Go to Objects
There is "Hide control points" in Visibility section
Enjoy!
PS:...
Type: Posts; User: Melkiades
Just check it at Rhino 7. Guess 8 must be same
Go to Tools-Options-View-Display Modes
Choose desired display mode. Go to Objects
There is "Hide control points" in Visibility section
Enjoy!
PS:...
Is it possible to use expressions in RhinoCAM PP macro?
For example X[VAR_1]+[VAR_2]?
Now it's return X1+2
Exactly i need to change tool number.
So, expression like T[TOOL_NUM]+5 must return T6,...
Copy firmware update to root of USB not exceeded of 8Gb, formatted as FAT32
Turn off DSP
Holding green and yellow buttons, turn power on. You don't need turn whole machine, DSP works well after...
BTW, just found answer to JeeyBee question about direct settings coordinates to G54-G59
In any mode (Pos, Program, Offset etc) push Arrow at left of F1, then F4 (COORD)
You'll see all offsets in...
M6 may be restricted in parameters, in this case any M6 call will cause alarm. The best way to use this system without ATC is correct your CAM Postprocessor.
Macro also depends of ATC installed, it...
I'm guessing what BobCAM manager looking in Rhino workflow?
Nope, Al
Newbies only.
Like me. LOL.
Hi everybody!
Why "Out of Sync" error may appear when i start TP Regeneration?
The most wanted is CF card image from working machine.
Manufacturer ignoring any my requests.
The second is I need user and programmers manual, and, may be, example of working TP.
Not good idea, LN-JET.
First bad thing is i cannot rebuild selected curve points - command not applicable to selection, only to whole object.
Second bad thing - result will be single segment curve....
No - i need point editing.
Can someone suggest me commant to convert sharp corner control point to smooth?
Cheap but rigid machine.
It had plate at Z axis with asynchronous spindle installed, but it was removed to install current router. Invertor , which power old spindle should be mounted below the...
For tp creation RhinoCAM using mesh - NOT NURBS
Exactly it use rendering mesh. Obviously it set to poor quality for best perfomance
Go to Rhino Options page, in Document Properties choose Mesh,...
My PP not working correct with drilling cycles.
At my 0501 drill bit not rise after cycle, move to another drilling point, and breaking tool.
Be careful with this.
You can only rotate axis direction.
Double click on Setup icon in TP tree, there you can see "rotate about" option.
To set Z axis down, you need change Spin angle to 180 and click on appropriate...
Thank you, Maroslav, i fix this. No more help needed.
It was strange turkish made cnc router, with two independent spindles.
Tool change realised by user subprogram implemented in CCU.
PP was made...
Thank you, but this reply was my personal opinion about your product, not a claim.
And it was addressed to Andrew.
Few month before you recommend me to be registered at your forum to post my...
Anybody have PP for this?
Also i want transfer files directly to CNC. Any manual/suggestion will be appreciated.
Any software have bugs. RC too.
Last one boring me is time to time it ignores side slots in curves created by boolean. This problem appears in 2016 and they not fix it yet.
Also it have bug with...
Matt, when you buy next generation of car you own for years, do you think floor matt should fit perfectly there?
Rhino 6 is new compiled software. It looks similar but have different structure,...
It's should be Jery Jiang, relation and support responsible person. He don't like to give support to any end customer.
Obviously he'll tell you it's your problem, because you not buy DSP directly...
I encounter situation with pass-to-pass tool retractions when make profiling TP with conical shape tool.
It cause also at V-carving TP.
BTW, why V-carving in Rinocam perform such strange...
Works fine for me.
May be your problem with wire connection?
At J7 connector signals from S0 and SP- should be connected to invertor properly.
With T-splies it's possible by hand-made with retopo snap turned on.
But it's not useful for me.
I know two 3rd party software for triangle to quads conversion, Zbrush and 3D coat.
After...
Rhino have two plugins for organic modelling with nurbs result: T-splines (RIP), and Clayoo (stiil under develop).
Both of them using low-poly square mesh to create nurbs.
Clayoo 2.0 have also...
I made similar looking legs.
374648
374650
This one was created by 2rail sweep, then surfaces was joined.
3 rails, about 6 profiles.
But yours a bit complex. I never made forms like this, but...
Try save it as template and choose it as default
Here is it:
https://dfiles.ru/files/h48gsytoi
This two pp was modifyed by me especially for DSP 0501 units from Ritzahong
Unpack it to Posts\ in rhinocam installation folder.
Choose appropriate...
How is toolpath looking? What tool do you using for finishing?
I not sure it helps, but you may try:
Go to Tools-Options
In Document Properties go to Mesh and change Jagger&Faster to Smooth&...