Check the following error screen. The servos might be out of balance. When sitting still the following error should be as close to zero as possible.
Tom the Fagor guy
Type: Posts; User: tmax
Check the following error screen. The servos might be out of balance. When sitting still the following error should be as close to zero as possible.
Tom the Fagor guy
Is there a backup on the Card? If the parameters are backed up you will see them on the machine parameters page. PLC and other files would be on the card as well. There is a restore function on the...
If thread is single pass use G33, for multiple passes use G86, and yes it has to have a spindle encoder attached to spindle
Mike Grover and Patrick Bollar
They are now Diversified Machine Systems (DMS) in Gainesville, TX
Hey Unimatrix,
The 800T is a bit tricky to use. You can only run one iso program, 99996. It's programming is very similar to 8025, but the cycles are a little different as shown it's programming...
I've been getting calls for this for 9 years. If you turn the page for G68 it explains this:
5. The pattern can be made up of straight lines and arcs. All the blocks of pattern
definition will be...