Is the table connected directly to the laptop or through some Ethernet switch (like internal company network)?
Type: Posts; User: RaraAvis
Is the table connected directly to the laptop or through some Ethernet switch (like internal company network)?
Fixed! Thank you!
With the output board that had 3 relays (I no longer see it in the online shop!) the VFD control through the 0-10V line is pretty accurate. I presume (hope) that the new OB3/4 model preserved the...
Hi,
With the latest release of TNG (2023.05.04) the Zoom Part feature is broken. It zooms to somewhere like the central of the X/Y defined range no matter where the part to actually machine is...
The VFD is ramping up the spindle RPM while limiting the current not to exceed the spindle maximum current. There is no guarantee that the spindle speed increases linearly in time.
Also, I would...
The actual gantry squaring is working as expected. Just that if I stop the process (E-Stop) due to whatever reason, the settings are messed up and I have to manually go to File->Settings and...
Please ignore the issue with V axis switch getting triggered first, it was a broken wire!
Hi,
I have found a rather serious set of problems related to homing and gantry squaring issues:
- If the gantry squaring is stopped in any other way than normal script execution, the master/slave...
So if I use a 3D probe to measure the surface and then install the cutting tool I am no longer able to compensate for the tool length?
What PC configuration are you using for Linux? I have no visible problems with RPi4 and fully updated distribution
You got it wrong! The link from PlanetCNC is apparently for a newer version... probably not yet uploaded to the website!
Although, there is no new information in the changelog!
The Gen8 i5 PC is running Windows 10 and the CNCs are different mechanically. It is not a copied profile, but a new one built from scratch.
I have access to two different machines with the MK3 controller. One of them using RPi4 and the other a Gen8 i5 laptop. Both of them exhibit similar problems with the latest release, but to a...
Hi,
I have a rather long GCode that freezes immediately the latest TNG, as of writing this message. If I remove the G61 all is OK.
I have uploaded the offending GCode and the currently use TNG...